Attaching Front to Bird Feeder

Video Transcript

"The side pieces are in. We would not nail them together yet but we would measure this off which is 6 inches. We would cut another 6 inch piece for the front. But what you want to do when you cut that 6 inch piece cut it a little bit shorter so the feed would drop down through there onto the bottom. This piece here is going to go like this. You can see there is a little room down here for the feed to come out. When you put the bottom on you are going to see why. So what we want to do is cut this on a 25 degree angle and we can do this on this saw in just one second. Now when you put it on there, it has the same angle as this one here. So you put it on like this. What we have to do is tact some of this together and what I like to use is a brad nailer and some glue. So we would do that on the next step. "