Finishing a Razor Blade Charm Bracelet

Video Transcript

"JASON HARRIS: Hi, I'm Jason with ExpertVillage.com. We're to the final step of our bracelet. We've added the clasp onto the back and tied our knot. We've put glue on all of the knots so they won't come undone. And now all what we need to do is tie a knot in the end. We want to get this as close to the end as we possibly can, then slip the post through the center of the knot, somehow. It's usually not this hard. I don't know what my problem is. Okay. So we put the center of the knot in the clasp. Now just close this just like it was a safety pin. And if you can't close it all the way, use your pliers. You only have to use your pliers the first time. After that, you can move it side to side and it will come right off. You can take the bracelet on and off as many times as you want. So now, it's in there, just like the safety pin. There we go. Now, you can use this just like the safety pin, just a tiny bit of pressure, pull it out, pull your knot off, and you can put the bracelet on and off. Take it on and off as many times as you want. Just use that just like a regular clasp. And there's your recycled wire bracelet."