Tools Needed for Art Supplies Toolbox

Video Transcript

"Hi, this is John and in this clip I'll be talking about the tools needed to complete our project. First we're going to need a pencil and tape measure to help us do all the measuring and marking and designing and drawing up our projects. To cut out the end pieces, we use a radial arm saw to size up the length, a table saw to cut the width and a band saw to cut our angles. For our long sides, the bottom, and the handle we use the radial arm saw to cut the length and the table saw to cut the width. To assemble all of our pieces together, we need a drill with a few different sizes of drill bits, depending on if you want to counter-sink your screws or not. And in addition, we need a screwdriver bit for our drill. For the handle notch we used a drill and a band saw to finish cutting it out. And for our dividers we used the same procedure of using a drill to drill a hole, and a band saw to finish cutting it out. And lastly we finished up our project by sanding it with a few different grits of sand paper."