Halloween Crafts: Making a Spiderweb

Video Transcript

"Okay, now we're ready to build the frame for our spider web. So you're going to take your sticks and you're going to place them in a Tic Tac Toe shape. You want two going vertically and two horizontally, overlapping, and we're going to tie those together but also I recommend putting just a small amount of glue. You can use your tacky glue or you can use a glue gun and you're just going to glue these together before we start putting that ribbon on there to make sure that they stay good and tight. So glue your Tic Tac Toe shape down. For time reasons I'm using a glue gun but you can use the tacky glue and it's going to work just as fine and while that dries you're going to take your ribbon, your cording that you're going to use, and you want to cut about four pieces that are an inch or two long and you can always cut of the excess. So we're just going to cut three and now four and set that aside and you want to begin wrapping the corners of your box with this. So we're just going to slide this under here and you're going to start tying this between the slats in knots and you're just going to continue until you run out of cording. I'm going to tie and then I'm going to wrap around and flip it over and do the same on the back and you're just going to continue that process on all four corners until they are completely covered."