Wiping Down the Outside Frame of a Rome 22caliber Revolver

Video Transcript

"Here we are with the outside of the frame and really there's not a lot to the outside of the frame because most of the only parts that we scrubbed was the inside of the hammer and the firing pin, the back end of the firing pin, and this loading gate, here. So, we'll take a couple of our patches and we'll wipe down here. Mostly, what this does, or mostly what we're doing here on the outside of the frame is we're picking up some of this excess oil and the excess Break Free from the frame. We just kind of work our way around and come across the top here, the barrel. Front sight, this flat top sight. Come down to, I'm on the left side of the frame now. Come around (snap) whoops, I little startling. Check the trigger guard, I wiped the inside strap here, bottom of the butt, and that's when I kind of just spin it back and I just kind of work my way back over the back strap and back under that hammer. Alright! I'm just kind of do a by. I'm just going to do an eyesight check and I'm just kind of look around the firearm and I'm going to make sure that I don't have any build-up of oil or possibly anything else. I'm just going to flip it around here. I'm going to kind of look down the barrel. Looking pretty good. Not a lot of excess oil and if you see anything, and I see a little bit right here on the side of my frame. I'm just going to take a patch here and I'm going to do a little bit of extra wipe. Now, that's perfect. I'm just going to keep going with my overall check and look over my strap. Good. We're looking pretty good so what we're going to do next is we're actually going to start reassembling this revolver."