Doing the Final Assembly of a Ruger Mark 2 Gun

Video Transcript

"Alright, what we're going to check is that we got this firearm back together and we know we haven't inserted a magazine or anything. We just put it back together and just cleaned it. And what we're going to do is we're going to take it in our hand and we're just going to pull back this bolt and make sure. Alright, everything is looking real good. Now, if this hadn't gone back together correctly, what would the only difference would be is that bolt I'm going to hold it about where it would be, this is about where the bolt would stop. And what that would mean is not that anything is messed up, it would just necessarily mean that you'd take back out the main spring housing and what didn't happen was our hammer strut didn't engage the main spring housing plunger. So, we got ours fully coming out and just remember if it only came out to about this point here where I'm holding it, that's all you need to do. Alright, everything looks to be going good here. And what we're going to do next is we're just going to wipe down the firearm and do just kind of a final look over of the actual firearm."