How to Wipe Down Benelli 12g 28" Shotgun Receiver

Video Transcript

"Alright, so here we are. We've got our barrel wiped down, scrubbed up. We have our cap, our forearm, and now we're on to our receiver with the tube. We've been using a towel here on every part because this is just a bigger area. So, I'm going to wipe down, I'm going to start with the receiver here and I'm just going to take my left hand and grab the shotgun through the towel. I'm just going to set the butt of the shotgun on my leg and I'm just going to wipe this receiver real good. Get a lot of that excess oil. I'm going to do the same thing inside the trigger guard, then I'm going to kind of work my up here to the tube and I'm just going to, real circular motion just kind of, you just twist the shotgun around. Get a little view of it here. We're just going to move the shotgun around. What we're doing is just moving it in a rocking motion like this. What we're going to do is, we're going to pay a little bit of close attention up here to the threads. Make sure. We're just going to make sure these threads have no obstructions, don't have oil setting in them or anything along those lines. That's looking pretty good. What I'm going to do now is I'm actually going to incorporate some of my patches and I'm going to use my patches inside, inside here in the receiver."