Shower Head Inspection After Cleaning

Video Transcript

"Hi I am Adolph Ramirez from Tampa, Florida and on behalf of Expert Village today I will show you how to clean a shower head. So everything is assembled, I went ahead and took the whole thing apart and we cleaned it all out. We got all of the mineral deposits off and checked all of the washers. We put on brand new teflon tape. Now we are going to go ahead and do a quick check to make sure that we have no leaks. I am going to go ahead and turn it on and hopefully we will not have any leaks in these joints. If we do have a leak, we will go ahead and tweek it a little bit. We are going to go ahead and do a test. We will turn on the water and there is my spray. As you can see there is no leaks. Everything is bone dry. We have very good pressure now compared to before and let's just assume that if we did not have the pressure we would go ahead and take it apart again. This is supposed to come out and that is very normal on this particular system that I have here. Basically all we did was just check for leaks and make sure there were no leaks anywhere else. The water pressure is coming out very good."