How to Make Window Stops

Save
Next Video:
How to Install Window Stops....5

Learn how to make, measure, and cut window stops from a window installation engineer in this free video on remodeling your house.

Part of the Video Series: How to Replace Windows
Promoted By Zergnet

Comments

Video Transcript

What I am going to do today is I am going to show you how to make stops. There is a two inch depth from the window to the outside of the brick mold. I am going to make about 1 inch and 1/2 to about 1 inch and 5/8, it doesn't really matter that much. All I do is I take my saw and this from here to here is about 1 inch and 5/8. I finger scroll it and then just rip it down. Now what I do is get it to size. I try to put the in fours because that makes it 1 inch and 1/2. The window is 45 and 1/2. I will make my stops 45 because that gives me play and gives me the ability to put a bottom strip on the window that won't get in the way. I flush my ends and they are 45 each way. There again close is good because it is all going to be covered. It is just a stop. It is not molding. I drop my plate back up. Grab a bunch, cut far side first, other side next. Repeat. That's how you make a stop.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!