How to Replace Brake Pads

Video Transcript

"Next we're going to talk about putting the pads back and seating them. So basically once you've had your rotor machines or replaced it, you want to put the bracket that holds the pads back on to the vehicle. You take the two bolts out, make sure you can clean up all of the bracket wheel in here, replace your bolts back inside the spindle. You want to make sure you get these to go back in properly, so they do not cross-thread- then you have a real problem on your hands if that happens. Which it can be fixed. Get them started a little bit. Take your wrench, tighten that down. You want to make you them on nice and snug, you don't want this coming apart when you're driving. Once you've cleaned your bracket off, make sure you just bring it in, you want to take the pads and put them back into place. And that is basically how you put your braking bracket back on, over the rotor."