How to Index & Remove a Drive Shaft

Save
Next Video:
How to Lube a New U Joint....5

How to index and remove the drive shaft when replacing a U joint. Learn about universal joint replacement on a car's rear axle in this free car repair video.

Part of the Video Series: Replacing a Rear Axle U Joint
Promoted By Zergnet

Comments

Video Transcript

In this clip we are going to talk about the proper service procedure for removing and replacing a rear axle U joint on a Ford Explorer. In this step we are going to talk about the proper service procedure for indexing of the drive shaft and actual removal. The drive shaft is not balanced when it is made and they take it and put it in a machine and spin it to a high speed and apply weights to it. We are going to want to match that drive shaft up exactly where it came from on the vehicle. To do that we are going to use a piece of silt stone. What I'm going to do with my silt stone is take and draw a large line down the drive shaft onto the other side of the U joint and down the axle flange and onto to the differential case. The reason why I put such a large mark on there is during the service procedure you may rub off a small mark. If you were to take and just put a dinky mark on there you may actually rub it off and then you run the possibility of lining it up out of balance. On this style U joint or drive shaft, you're going to have to use a hammer to break the corrosion between the pinion flange and the end of the drive shaft. I'm going to hold onto it with my hand and pop it with the hammer. You can see it's beginning to break free. What you're going to do is just slide it out from there. Alright and there we go. Once you have it free from the pinion flange you can slide it out of the front of the transmission or out of the rear of the transmission. It just slides together. Go ahead grab a hold of the drive shaft and slide it out. Just like so. That is the proper way to index your drive shaft and remove it from the vehicle for U joint service.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!