Removing Radio Bezel to Replace Dashboard Lights

Save
Next Video:
Removing Instrument Cluster Bezel....5

Remove radio bezel before disconnecting electronics. Learn about procedure for installing dashboard lights in a 1996 Ford Explorer in this free auto repair series from a master mechanic.

Part of the Video Series: How to Replace Dashboard Lights
Promoted By Zergnet

Comments

Video Transcript

Today we're changing instrument cluster lights on a '96 Ford Explorer. Okay as you can see the radio bezel actually goes over the top of our instrument cluster bezel. We're going to have to go ahead and the screws out of this and slip it out of the way. We're going to go ahead and put this in the magnetic tray for later re-installation, we got one more screw to deal with. Alright we're going to put him in the tray as well. Once you have the screws out you can take and wiggle out your radio bezel, just like so. Once you have your bezel out, you can take and disconnect any electronics you need to, if you need to. At this point, we don't need to we have got enough room around here to remove the instrument cluster bezel. That is the proper service procedure for removing your headlight switch, your four wheel drive switch, and your radio bezel.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!