How to Install New Fog Lights

Next Video:
How to Adjust Fog Lights....5

Learn how to install new fog lights with expert automotive tips in this free online car maintenance and repair video clip.

Part of the Video Series: How to Replace Fog Lights
Promoted By Zergnet


Video Transcript

In these clips we're going to talk about the proper way to diagnose and replace your vehicle's fog lights or accessory lights. In this clip we're going to talk about remounting of your new fog light assembly. As you can see I have it right here, it's going to go exactly in place where the old one was. This is your mounting stud, and locking washer, and this is the retaining nut. We're going to take it and slide it into position here, insert it in the hole. You may have to give a wiggle. Once you have it in position, you can go ahead and reach through and start your new retaining nut. Most of the time you're going to be tightening your new fog light assembly down into a plastic bumper cover. You're going to want to be delicate in your tightening sequence to ensure that you don't damage the cover of your bumper. There are several different mounting methods and if it's not similar to this one, refer to the directions that came with your fog light accessory package. Go ahead and begin the torch process for my light. Once you have it tighten down, you're going to go ahead and repeat the same procedures for your other side fog light and we're going to go ahead and step back to the passenger side or passenger compartment of the vehicle, fire it up, and see if our fog lights work.


Related Searches

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!