Print Banners at Full Bleed Capability

"Hi everyone, I’m Doug Downey on behalf of Expert Village. I’m here today to show you how to digitally print vinyl banners. Okay, so now I want to show you the full bleed capability of the ready to print digital print banner roles. And so what I’ve done, remember the white background that we had exported in the earlier video, so what we did, is we took the box artwork and we stuck it in the background here, as you can see, making it, remember that 30.4 inches in height by 120 inches. So same as the white background that we exported so what I did, is I put the template on top so you can see that it’s going to print right over the top of the, right over top of the grommets. So you can see in this picture here what I’m trying to, what I’m trying to show you is that the roller sits on the outside white area here and will and the heads will print right over top of the grommets leaving you a bleed on the outside that you can trim along. One little tip, is that you can just wipe the grommets off after you’re done printing, sometimes it stays, doesn’t dry very well so you just take a little cloth and wipe it and shine them up and then trim the ends and out the door you go with it, a full bleed digital printed banner."