Reconnecting Wiring Harness for Car Stereo Installation

Next Video:
Installing New Rear Speakers for Car Stereo Installation....5

Learn tips and techniques on reconnecting the wiring harness in this free how-to video on installing a new car stereo and speakers.

Part of the Video Series: How to Install Car Stereos & Speakers
Promoted By Zergnet


Video Transcript

In this video clip, I will take you through step 3 in our procedure for replacing a rear speaker. The next thing we need to do is go ahead and get our new speaker. Now, this rear speaker is 6x9, so I’d recommend buying one of the same size, otherwise you might have problems putting it in. What we need to do at this point is go ahead and place that holding bracket on. And it will be a little bit difficult because there is that magnet here that will pull that plate to it. Once you get that positioned, the magnet should hold it in place. After that, we need to find our wiring harness and go ahead and connect that back up. When you put it on, you should hear a click that will tell you it’s secure. And you can go ahead and give it a little wiggle to make sure that it doesn’t come off.


Related Searches

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!