How to Install the New Car Stereo System

Next Video:
How to Remove the Old Car Stereo System....5

Learn from our expert some great techniques for installing the new stereo in this free how-to video on installing a new car stereo and speakers.

Part of the Video Series: How to Install Car Stereos & Speakers
Promoted By Zergnet


Video Transcript

In this video clip, I will be taking you through step 4 in our procedure for installing a new car stereo. The next thing that we need to do is hook up our new stereo and coming out of the back of my new stereo here, I have a wiring harness and another black wire here which will be attached to the antenna so you can go ahead and plug that antenna in which will go into the back of the stereo and we are going to go ahead and connect our wiring harness. Now you are going to want to make sure that you get it the right way and that it is not turned around. Typically it will only go in one way but you want to verify that is in there. When you push it in, you should here a little click that will tell you that it is securely in there. Next we can go ahead and push all these wires into the back and you want to be careful when you do this so that you don’t damage any of them or disconnect any of them. You can go ahead and set your unit all the way in there.


Related Searches

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!