Removing the Holding Screws for Car Stereo Installation

Next Video:
How to Remove the Old Car Stereo System....5

Learn how to install or replace a car stereo system, including tips and techniques for removing the holding screws in this free how-to video on installing a new car stereo and speakers.

Part of the Video Series: How to Install Car Stereos & Speakers
Promoted By Zergnet


Video Transcript

Hi! This is John. In this video clip, I will be taking you through step 2 in our procedure for installing a new car stereo. In this step, we will need to remove the holding plate screws and on this particular model, there are two screws that are holding our old radio in. These two particular screws use a Phillips head screwdriver, so I am going to go ahead and take those out and you want to be sure to hang on to these because we may need them for our new stereo. Now on our old stereo we used a Phillips head bit to get those retaining screws out. You might also have a flat head, a star head or an Allen head that will need to be used to remove the retaining bolts of your car stereo.


Related Searches

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!