Cleaning a Computer's Side Panel

"Hi welcome back to expertvillage.com and here is the screen, or the filter that I mention earlier in the previous clip. What I did is just washed it under running faucet with water and soap and just dried it out with a paper towel and that is it. Over here is the fan here that belongs over here with the side intake. What we are going to do now is the same thing that we did earlier in the other fans is just spray a little bit of air. Like that. Make sure that you hold the blade again you don't want to do this. Let me show you you don't want to do that. You want to hold it study. Spray. Spray the back part. Now, sometimes there is still going to be a little bit of dust in between the blades so you could either take the soft bristle brush and just brush in between the blades. Like that. Or what you could do you could also use some cotton swabs like if you like you could take one and dip it in water and moisten the tip and rub in between the blades. Okay like that. Okay now we are done. What we are going to do is just put it back over here on the side panel. But, before I do that we still got to clean this thing you could still see that there is a little bit of dust here. So again you could take a piece of moist towel and instead of blowing dust all over the thing you could just pick it up with a moist towel, paper towel or something. There you go. There and then you could just blow a little bit of air again just to loosen some of the dust. That is it there you have it all nice and clean."