How to Connect a Sink Sprayer

Save
Next Video:
How to Soundproof a Sink....5

Connecting a sink sprayer requires you to determine exactly how many holes are in the sink in the first place. Connect a sink sprayer with help from the president and owner of Source Development Inc. in this free video clip.

Part of the Video Series: Home Sweet Home Repair
Promoted By Zergnet

Comments

Video Transcript

Hi, this is Nicholas Iarocci, The Home Source Guy, president and owner of Source Development, Inc., a residential and commercial construction company in Garnerville, New York and this is how to connect a sink sprayer. This particular sink is a four hole sink. So obviously they come in all different sizes, varieties, this is a typical three stem based with an additional hole for the hand spray. Okay I'm going to install the gasket on it and this has a little reservoir to put putty in if you wanted to. Okay I'm going to mount the faucet or new faucet in the sink. I'm going to install these retaining nuts here. Now from the back I'm going to make sure that the faucet is centered in the holes. I'm going to hand tighten, double check from the front and then I'm going to continue to tighten the channel locks. It doesn't have to be over tightened. For our hand spray I'm going to take some putty and install it around the perimeter of the base and then mount it. Again I'm going to keep the hole centered and I'm going to hand tighten, give it a quick tightening with the channel locks. We're going to insert our hose and in this case our spray is a push-in style. I'm going to remove the protective bushing that protects the O rings and I'm going to install our spray by just pushing over. The actual hand spray just gets screwed onto the hose. So again in your sprayer if it's a push-in plug it's a relatively easy installation but if you have to use, if it's a nut type of application and you use a basin wrench or some channel locks to get in there, it might be a little grueling on the back but you know I think you'll manage. It's a relatively simple installation. So this was how to install a kitchen sprayer on a sink. This is Nicholas Iarocci. The Home Source Guy, president and owner of Source Development, Inc., a residential and commercial construction company in Garnerville, New York helping you build a better life. Reach out to me on Facebook at The Home Source Guy. We'll see you next time.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!