Instructions for How to Mount a Front Volvo License Plate Bracket

Save
Next Video:
Tricks to Unlocking a Power Door When You Lock the Keys In....5

Mounting a front Volvo license plate bracket is easy, so long as you're following the proper instructions. Mount a front Volvo license plate bracket with help from an expert in the automotive industry in this free video clip.

Part of the Video Series: Car Repair Tips
Promoted By Zergnet

Comments

Video Transcript

Hi. I'm Rob Holcomb from Apex Automotive in Great Barrington, Massachusetts. Today, we're going to talk about how to mount a front license plate bracket on this Volvo. The bracket, typically you'll find them in the trunk or under the seat of the car when you buy the car new. Some states require that you have two license plates and Massachusetts is one of them. So, we'll need to attach this bracket in order to attach this license plate. The front of the bumper has two receiving holes and screws that go through the bracket. I'm going to put a little bit of Never-Seez on these bolts before I put them on the bumper. This is so we can remove those screws after they've been in there for quite a while. In the northeast, we have a lot of salt on the roads and if we ever want to remove these bolts, we'll be happy we put that Never-Seez on. I'm going to install the one, apply some more Never-Seez, we can even put a little bit of Never-Seez where the bracket meets the receiver to keep it from corroding. Once I've installed both screws then I can tighten them down. You don't want to put too much torque on it and it's only in a plastic bumper. Once the bracket is attached, I can then attach my license plate. And these are the instructions on how to put a front license plate bracket on a Volvo. I'm Bob Holcomb from Apex Automotive in Great Barrington, Massachusetts.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!