Comments on: How to Remove Hard Water Deposits

10 Comments From eHow Members

Return to article: How to Remove Hard Water Deposits

agglisht said

on 10/3/2008 I have tried everything over the counter to get rid of my hard water stains from the tile in my bathroom. I never thought of using vinager. It works great!!!!

on 6/17/2007 Oven cleaner I swear by it, leave on for a couple of hours, then scrub with steel wool, be carefull as the chemical can burn your skin, and can melt plastic, just watch it to make sure nothing gets ruined

joyb2u said

on 1/6/2007 How can I clean stained Rubbermaid sink pads?

Anonymous said

on 8/24/2006 For old rings around drains and faucets:

Very gently scrape the surface using a putty knife. Some surfaces will tolerate it and you can apply more pressure, and some will show a mark. It worked for our bathtub and old solid surface countertops when the chemical solutions didn't, and it was fast. I tried it on the toilet but it left faint gray scratch marks...we have to use a pumice stone there in combination with CLR.

Anonymous said

on 11/22/2005 Use baking soda and vinegar, nothing fancy or expensive. For my white tile countertops I have a puddle of vinegar, a little pile of soda poured from the box, an old toothbrush, dip into each and lightly, you don't have to scrub hard, brush the grout absolutely clean, wipe off with clear water. I usually dry with a clean towel and it sparkles. On walls and my glass shower doors, I have 2 little containers for each ingredient, dip the cloth or sponge into each and apply, it will be like a paste. You may have to reapply depending on how bad it has gotten. Rinse off with clear water, you can dry it off if you like, but it isn't necessary.

Anonymous said

on 11/22/2005 I have found a product called A-Maz Clean and Clear Water Stain Remover. This worked on our chrome fixtures and on our black cast iron sink. All you have to do is apply the product to the area that is stained, let it dry, and wipe it clean.

Anonymous said

on 11/22/2005 Use the shiny side of aluminum foil to remove water stains and buildup from metal fixtures. Rub until the stain is gone, then wipe it clean with a cloth.

Anonymous said

on 11/22/2005 A product called CLR available in most hardware stores works wonders...alittle pricey but it will make the surface look brand new.

Anonymous said

on 11/22/2005 Hard water deposits on bath fixtures seem nearly impossible to remove. The quickest and least expensive way I have found is to use rubbing alcohol on a terry cloth rag. Rubbing alcohol also works well on bathroom mirros, goodbye toothpaste spatters!

Anonymous said

on 11/22/2005 The product "Bar Keepers Friend" works great for this. This is found next to the Ajax cleaner in the store.

Post this comment to my Facebook Profile

Post a Comment

Return to article: How to Remove Hard Water Deposits

Related Ads