Comments on How to Re-grout and Reseal Ceramic Tile

The easiest way to remove old grout is to use a vibro made by nyrobi. It is originally a wood carving device but with a certain metal tip it can vibrate the grout out quickly. It is currently a discontinued item but might be found at a thrift store.

I used my Dremel to remove old grout. You can buy a special bit for this job, but when using it in the bathroom, be aware that the smallest bit may be too large for the grout line and you may chew through the tile. Use eye protection!!

Make sure you use a "float". I had no idea what it was (being a woman). Just go to the store and ask for one in the tile isle. It makes grouting soooo much easier, especially for the corners, and the tiles flush with the wall. Use the edges of the tool to push the grout into the grooves.

Always work diagonally to the joints, both when applying grout and when cleaning. This prevents pulling the grout out of the joint.

The Dremel Grout Removal Kit is really great, but be sure that you wear all the safety equipment they recommend. The face mask, eye protection (it does occasionally throw little chunks right into your eye), and have a shop vac handy for all the dust. You can't, however, get the bottom inch of grout right by a tub surface without removing the little guide. Good luck!

Always work diagonally to the joints, both when applying grout and when cleaning. This prevents pulling the grout out of the joint.

The easiest way to remove old grout is to use a vibro made by nyrobi. It is originally a wood carving device but with a certain metal tip it can vibrate the grout out quickly. It is currently a discontinued item but might be found at a thrift store.