Return to article: How to Get a High-Performance Car Audio System
on 6/25/2008 hi,i m driving a saab 93.i m looking for a good car audio system but my budget is SGD$10K.Could anyone assist me how to get a good set or a professional shop that could set up for me?tks a lot
on 1/31/2008 Buying based on max watts is for ignorant people, rms watts are the watts that your speakers can handle consistently or your amp push without exploding. Rms watts are usually around half of the max watts. TAKING YOUR TIME is essential. Theres nothing more frustrating then not measuring and breaking something and having it look like crap!
on 1/31/2008 Ditto max watts are for ignorant people, rms watts are the watts that your speakers can handle consistently or your amp push without exploding. Rms watts are usually around half of the max watts. TAKING YOUR TIME is essential. Theres nothing more frustrating then not measuring and breaking something and having it look like crap!
on 11/22/2005 I have installed 3 alarms in compact cars, using budget brands like Carbine, Hornet and PhoenixDigital. Having done that, I would recommend getting a better quality unit with lifetime warranty, since the processor\\Main units on these units are prone to fail after a few years due to the 12V surges and heat buildup in car systems. Expect to pay about $99-$150 for the basic unit and transmitters alone. These are overall more challenging to install than any car stereo head unit, since there are more wiring and dealing with OEM scehmatics to find the right wires to solder your connections to. Have a good shop do this if you are not experienced with wiring and basic electronics. Give yourself about 6 hours to install one by yourself given the complexity. They are also more intense to troubleshoot as well. Some brands like CrimeStopper come now with factory harnesses , which can cut an install job down to 2 hours. Good Luck!
on 11/22/2005 There is a huge difference from MAX watts and RMS, know the difference and nothing will be misrepresented to you.
on 11/22/2005 The most important thing that I can tell you is - take your time and do it right! Solder everything and you won't have to pull everything apart later to find the loose connection (if any exist). Tighten everything. Clean everything very well, too. Pay attention to all manufacturer's recommendations. Stay away from Legacy and Lanzar. Two or three batteries and a good alternator will beat out most low farad capacitors (and they last much longer). You don't need to spend thousands of dollars buying the most expensive stuff.
Copyright © 1999-2008 eHow, Inc. Use of this web site constitutes acceptance of the eHow Terms of Use and Privacy Policy.
Partner Sites
