home sectionhome section
Installing a sink drainpipe requires you to start at the end and work backwards. Install a sink drainpipe with help from the president and owner of Source Development Inc. in this free video clip.
If your kitchen sink is leaking where the basket installed, the first thing you need to do is go get your trap wrench. Stop a kitchen sink from leaking where the basket is installed with help from the president and owner of Source Development Inc. in this free video clip.
Installing a sink requires you to first remove any clips that are present and move the bowl over to the counter top. Install a sink with help from the president and owner of Source Development Inc. in this free video clip.
Bathroom sink replacement is a process that varies depending on things like whether or not you have a pre-drilled counter top. Learn about bathroom sink replacement with help from the president and owner of Source Development Inc. in this free video clip.
Properly installing a sink drain in a stainless steel sink will require you to install one strainer for each drain that is present. Properly install a sink drain in a stainless steel sink with help from the president and owner of Source Development Inc. in this free video clip.
Stainless steel sinks require clips that have to be installed at the bottom of the sink. Attach sink clips with help from the president and owner of Source Development Inc. in this free video clip.
Plumbing a sink is a term used to describe the process of removing unfortunate clogs. Plumb a sink with help from the president and owner of Source Development Inc. in this free video clip.
Sizing a kitchen sink requires you to take some very specific measurements of the area where it will ultimately go. Size a kitchen sink with help from the president and owner of Source Development Inc. in this free video clip.
You can avoid bathroom sink clogs by avoiding excess makeups, soap scum and other things of that nature. Avoid bathroom sink clogs with help from the president and owner of Source Development Inc. in this free video clip.
Plunging a double sink requires you to understand the nature of the clog in the first place. Plunge a double sink with help from the president and owner of Source Development Inc. in this free video clip.
Repairing a leak under the sink requires you to find the exact location of the leak in the first place. Repair a leak under the sink with help from a longtime construction expert in this free video clip.
When replacing a kitchen sink sprayer, you kind of have to think about everything in reverse. Replace a kitchen sink sprayer with help from a longtime construction expert in this free video clip.
Whether you need a sink in the basement for utility purposes or as part of a remodel, the main problem is drainage. Because it's at ground level, you may not be able to find an accessible place to tie into the sewer, and it may take a pump system to overcome this. Hooking up the water, on the other hand, is less challenging than doing it upstairs, because the sources usually are nearby.
Vessel sinks are fixtures finished on both the outside and inside. They are meant to sit on top of a vanity or pedestal, rather than within a countertop, and resemble an old fashioned basin that was once used for washing before indoor plumbing. Vessel sinks come in a wide variety of different styles and materials, and they work in many different bathroom designs. To help ensure that they function properly, use the correct faucets, fixtures and plumbing along with them.
Service sinks provide a practical alternative to using laundry sinks when mopping floors or cleaning accessory parts for vehicles. Unlike other faucets, service sink faucets have a bracing rod that allows hanging a bucket on the spout when filling it with water. If you had a service sink installed with shutoff valves and stub-outs for hot and cold water, you can save some costs by installing the faucet. Service sink faucets are available in a variety of finishes, and they come with the necessary installation parts. Installing the faucet requires basic carpentry and plumbing skills and everyday tools.
A new sink can change the entire feel of a room, and installing one is actually a simple job for the average homeowner. But new sinks mean new faucets, which leads to hooking up a water source. The plumbing is there, that's not the hard part. It's stopping the water that gives some homeowners fits. In fact, if you don't turn off the water before pulling out your old sink, you're going to have a very wet bathroom or kitchen. If you can't find your water shutoff valve, track it down, starting with the closest places.
Replacing the caulking on a kitchen sink requires a knife, a towel and a few other key tools. Replace the caulking on a kitchen sink with help from an experienced maintenance expert specializing in HVAC, plumbing and electrical in this free video clip.
Disconnecting water supply lines in your kitchen is necessary for a wide variety of different repair jobs. Disconnect water supply lines in your kitchen with help from an experienced maintenance expert specializing in HVAC, plumbing and electrical in this free video clip.
Getting a kitchen sink strainer loose only requires the right tools and the appropriate technique. Get a kitchen sink strainer loose with help from an experienced maintenance expert specializing in HVAC, plumbing and electrical in this free video clip.
Repairing the plumbing for a kitchen sink always requires you to keep a few very important things in mind. Repair the plumbing for a kitchen skin with help from an experienced maintenance expert specializing in HVAC, plumbing and electrical in this free video clip.
One useful tool to have around when changing your kitchen plumbing is called a P-trap. Change the kitchen plumbing with a P-trap with help from an experienced maintenance expert specializing in HVAC, plumbing and electrical in this free video clip.
You may need to change a pedestal sink's drain and P-trap assembly for several reasons -- when you discover faulty parts or if you're updating your bathroom decor. When replacing the old pop-up drain and P-trap, be sure to match it with a new assembly. Most pedestal sinks are designed to conceal the plumbing inside the base portion, which can create a tight working area.
Plumbing a bathroom area requires carefully following local building codes. Connecting each drain line and vent in a required diameter will keep the toilet water and gas from backing up into your sink. Think of plumbing as water flow affected by air pressure in the piping. Installing everything correctly will ensure that drainage of waste material takes place properly, moving toilet water into the sewer. Invest time in understanding how all bath plumbing connects, so you won’t leave out any steps.
Washing dishes, peeling potatoes and scrubbing vegetables aren’t the most exciting tasks, which may be one of the reasons many homeowners opt for a window directly above the kitchen sink. During sink installation, the plumber makes provisions for a drain and ventilation system that allows water and sink disposal waste to drain efficiently to the main sewer line. While drain pipes run downward, vent pipes run upward. Since the kitchen window placement blocks vertical venting, an alternative venting route is necessary.
A pedestal sink can be attractive, especially in a small bathroom that lacks space for a large vanity-style sink with a storage cabinet. Pedestal sinks often have elaborate and decorative bowls, but they all rest atop a column that conceals the water lines and drain pipe. The sink bowl typically is fastened to a wall. Preparing for installation of a pedestal sink involves "rough plumbing," which is running the basic water supply and drain lines to a place where they can be properly connected to the sink. If the sink is a replacement, that requires opening the wall to expose…
In trade parlance, “rough-in plumbing” refers to the installation of a building shell’s plumbing pipework, done before other tradespersons arrive on-site. Rough plumbing involves the water and sewer lines, the vents and sometimes the bathtubs. Rough-plumbing a toilet requires a working knowledge of several construction codes as well as plumbing expertise, so some municipalities -- especially those requiring a building permit for the work -- also mandate a licensed plumber perform the installation. In that case the job should not be undertaken by a DIYer, no matter how competent and well-equipped.
Create a useful spot for washing outdoor equipment or soaking laundry by adding a utility sink to your basement or garage. A drop-in sink requires a cabinet or base to support the sink. Florestone manufactures utility sinks, shower walls and bathtubs. Their drop-in utility sinks do not include the plumbing. You must separately purchase a faucet and drain pipe and install them on your own. When installing drop-in sinks, the key is to create a tight seal between the sink and the counter. Silicone caulk both glues the materials together and makes a watertight seal.
Plumbing supply lines for sinks are usually located on the rear wall under the sink or on the side of the cabinet wall under the sink, though sometimes they're routed through the floor directly under the sink in the center of the vanity or cabinet. Any of these locations is acceptable. If your sink has the plumbing on the rear or side walls, it's possible to move the plumbing to the center of the sink. Moving the plumbing requires cutting the old pipes and rerouting them to the center of the vanity or cabinet. Because sink drains require P-traps to…
Apron-front sinks, also called farmhouse sinks, can give your kitchen a rustic, country feel and a great deal more utility. An apron-front sink tends to be deeper and/or larger than traditional kitchen sinks. In addition to its greater size, the appeal of an apron-front sink comes also from the design or painted image on the panel. At the time of this publication, Whitehaus sells single- and double-basin apron-front sinks made of porcelain in a variety of colors, as well as those with copper or bronze finishes.
Apron sinks, also called farmhouse or French bibb sinks, lend old-world charm to kitchens in every type of home. These sinks are often hand-crafted from clay-based materials, then fired until hard. Because of this process, not only are apron sinks very heavy, they also lack standard dimensions. When installing an apron sink, you must measure extremely carefully to cut the counter and cabinet properly. Support for the sink is a must and cannot be compromised.
Your double sink is a lifesaver when it’s time to do the dishes or cook Christmas dinner. However, the two sink holes create an issue when the shared drain forms a nasty clog. Removing the clog correctly with an inexpensive manual tool is only part of the solution. It’s also crucial to prevent clogs before they occur by learning what can and cannot be put down your sink drains.
Replacing bathroom skin faucet handles can take an old sink and make it look as good as new. Replace bathroom sink faucet handles with help from a maintenance professional in this free video clip.
Many people choose to replace older or vintage bathroom sinks while renovating a bathroom, but a functional vintage sink can add charm to your bathroom. If you have a vintage sink in your bathroom, it's wise to care for it with supplies and techniques that help you maintain its condition. For decades, porcelain enamel has been the prime material used for bathroom sinks. This durable material is simple to clean and looks beautiful for years if you clean and care for it properly.
The key to the successful installation of an undermount sink is a secure seal. Undermount kitchen sinks are sealed to solid surface countertops with silicone caulk as they are installed. Once the sink hole is cut, you are ready to seal the undermount sink. Work carefully to ensure proper positioning of the undermount sink. Once the seal dries and the clips are in place the sink is difficult to move again.
Vessel sinks come in a variety of sizes and shapes. If you are remodeling your bathroom and want to create your own concrete vessel sink, it’s a fairly simple process. You need to create a concrete sink form using special molding material and an object, such as a bowl, for the sink’s model. Once you make the sink mold, it’s a matter of pouring concrete into the mold to create the vessel sink. After you make one mold, you can use it several times to make identical vessel sinks.
Installing sinks that sit back to back requires the plumbing underneath the sinks to connect to a central drain. Accomplishing this requires the use of two standard P-traps and a little elbow grease. Once your sinks are installed, the central drain will carry waste to the same drain line. This simplifies the plumbing and cuts down on the number of drain pipes that are needed for multiple sinks. Once your sinks are connected, both should drain with ease.
Sinks are one of the less appealing parts of a kitchen, so they're sometimes relegated to a corner where they're less visible. However, a corner sink also may be less functional. The odd angle and smaller size of a corner sink may create cleanup, lighting and traffic-flow problems in your kitchen.
Silgranit sinks, made by Blanco, are a line of manufactured sink products. They are made of a molded material that consists of 80 percent granite. Silgranit sinks are designed to be chip resistant and impermeable to scratching. However, accidents can happen, and even a Silgranit sink can be in need of repairs. You can patch up a Silgranit sink using epoxy, which will fill the scratch or chip and blend it into the rest of the sink. If the sink is structurally unsound, you'll need to replace it.
The farm sink or farmhouse-style sink is generally characterized by a porcelain bowl that's exposed to view at the front, as opposed to a drop-in sink style. Often it has flat sides, so that the overall form resembles a rectangular box with an open top. IKEA's Domsjo sink has just such a shape, making it ideal for a rustic farmhouse-style kitchen. While the Domsjo is ideal for pairing with IKEA's own kitchen countertop systems, you can fit it easily into a range of kitchen setups.
Corian, the manufacturer DuPont's brand name for a type of solid surface countertop, blends durability with beauty. It is waterproof, stain-resistant and is crafted in a dazzling array of colors and styles. Due to its longevity and value, some homeowners wish to keep their Corian counters and replace their existing self-rimming, overmount sink with a new undermount sink. Corian is the perfect countertop material for an undermount sink, as the material accepts screws and glues well and sports a lovely finished edge along the sink line.
Redoing your laundry room gives you a chance to make it look like an actual part of the living space in your home, rather than a drab, utilitarian annex. Adding neat, tidy and stylish equipment and fixtures adds to the effect. A laundry tub made of soapstone, for example, will look less depressing than a fiberglass or plastic basin. However, the weight of soapstone will require you to make some additional changes, especially if you are going for a larger sink, such as one that has double bowls.
Moen faucets with a side sprayer use a diverter to direct water to the sprayer when you press the handle. If the water only dribbles from the sprayer instead of spraying, it is possible that the diverter requires repair, which will involve either cleaning or replacing the diverter. It is necessary to disassemble the Moen kitchen sink faucet partially to access the diverter.
When installing a kitchen sink, you need an air admittance valve to let air into the drain line when water is flushed down it. An air admittance valve is a one-way valve that lets air in, but not out, so sewer and drain gases do not come through. Putting the valve on the drain line involves a few extra steps but it is something anyone with some experience running pipe can master. The valve connects directly to the drain line under your sink.
Plumbing fixtures such as a sink or bathtub have a trap filled with water to prevent noxious gases from entering the home. The trap requires a vent that prevents the water from being pulled out of the trap, but allows the drain to flow freely. A Studor air admittance valve allows air to enter the drain pipe without a vent connection and is useful when a connection to a vent pipe is impractical or impossible. The valve allows air to enter the drain pipe and prevents gases from escaping.
Zurn ADA sinks are typically found in commercial facilities, such as hospitals and warehouses. The sink is a wall mount unit without a pedestal that connects to the floor. Installing a Zurn ADA sink in your garage or bathroom usually requires adding some support behind the wall. Since there is no pedestal, the wall mounting bracket is the only support for the sink. It is necessary to provide some support between the studs behind the wall, which requires cutting a hole in the drywall.
There are few things as convenient as a sink in the laundry room. It provides a convenient place to soak clothing, fill buckets and large containers and pour out dirty mop water. Unfortunately, many do-it-yourselfers make a cardinal mistake when adding waste plumbing for a laundry sink. They do not vent the drain assembly appropriately and, as a result, they encounter a host of drainage issues later.
A double sink requires similar venting to a single sink because both drain water in the same way. The only difference is, a double sink has two sink bowls instead of one. Each needs a vent -- or air admittance valve, as they're often called -- to drain water properly. These vents let air flow into the drain pipe lines as water passes through, balancing the negative pressure occurring when water drains through the pipe. Installation only requires the most basic plumbing skills.
Corian is an acrylic material used in countertop fabrication. Installing an undermount stainless steel or ceramic sink requires using a silicone adhesive combined with mounting clips fastened underneath the countertop. Professional installers use acrylic adhesive to bond the sink mounting clips to the counters. The clips, when combined with the adhesive, are strong enough to support the weight of the sink. Installing an undermount sink requires some home improvement skill.
Replacing your current sink with a Dayton steel undermount sink requires ordering a sink that fits the current hole in your countertop. Measure the length and width of the opening, and order a compatible Dayton steel sink. You will need some assistance to install the sink, as someone must hold the sink in place from the top of the counter while you install it under the counter. Undermount sinks are secured to the countertop using caulk and sink clips.
An undermount sink that attaches to the bottom of a countertop adds a sleek and modern look to the area. Another benefit to installing an undermount sink is the convenience it offers when cleaning dirt, debris and other matter from the counters surface by wiping it right into the sink. Granite fabricators cut sink openings during fabrication of the granite countertops using a template provided by the sink manufacturer. For this reason, using the same type or style of sink is easiest. Finding a different style sink to fit this existing opening is extremely difficult if not impossible.
