Mastic and Thinset are the recommended adhesives for gluing mosaic tiles. Learn more about mosaic tile adhesives in this free video on making mosaics. more »

You have successfully removed the vinyl tiles from your flooring, but now you are left with a hard adhesive that you can't seem to scrape off. Vinyl tile adhesive needs to be softened before it can be removed. Trying to heat the adhesive with a heat gun then scrape it off used to be the only option to get the glue up that didn't involve a highly odorous, highly toxic adhesive remover. Fortunately, tile adhesive removers are now safer to use, and removing vinyl tile adhesive can be done in a few hours. more »

Laying linoleum or congoleum tiles requires the use of tile adhesives. When floors are difficult to stick to, such as concrete, extra adhesive may be used to make a stronger bond between the tile and the floor. The downside -- extra adhesive on the tile surface! This nontoxic adhesive remover is a staple in almost every kitchen. Cooking oil of any time can easily help remove tile adhesive, or any other oil-based glue product. more »

When you are retiling the floor or wall, removing the old tile adhesive may be the most difficult part of the entire project. Tile adhesive is a glue that hardens into a material that is very difficult to remove. One way to remove the adhesive is using a chisel and hammer. Start at the corner of the adhesive and work your way toward the center of the adhesive. Once you get to the middle of where the tile was, move on to the next corner. more »

Depending on the strength and type of tile adhesive, scraping can be the best way of removing old tile adhesive from wood floors. A sharp razor blade, putty knife or a soft wooden stick, such as a paint stirring stick, can all be used effectively to remove the old adhesive. The trick to scraping away the adhesive is to work slowly and carefully, section by section, taking care not to scratch or gouge the wood. Small scratches or scuffs can scraping can later be sanded away if you are refinishing the floor. Especially tough adhesive can also be sanded away in some cases. more »

When it's time to replace tile, the very adhesive used to lay the old tile can become a project's worst enemy. Adhesive is strong for a reason--it's supposed to be strong, to keep tile in place and to give you a good, strong, smooth floor. When embarking on a new tile floor project, be prepared for lots of hard work to remove tile adhesive. more »

When all the tiles are removed, all that's left behind is the mess of glues and adhesives that were hidden beneath. The adhesive that holds the tile in place is strong and adheres well, but it isn't at all cooperative when it comes time to get rid of it. Getting rid of floor tile adhesive is a much easier task with the right materials and knowledge. Learn how to remove this sticky substance with only a little time and effort. more »

The method you use to clean tile adhesive will depend on what sort of adhesive it is. If the adhesive is thinset mortar, it can be cleaned off with water and a rag or sponge. If the adhesive is like yellow or white "glue," you may have to use a solvent to clean it. Try peeling it off first; you just might get lucky. If not, there are several options to choose from. more »

Resilient floor tiles are relatively easy to remove and replace with a hair dryer, putty knife, chisel, a new tile, tile adhesive and something to weight the new tile with as the adhesive dries. more »