Things You’ll Need: drywall-compound

In this free video clip, learn how to patch holes for a new outlet and insulation. more »

After you have completed insulation of your existing interior walls, the finishing touch is to patch the holes made by the insulation equipment. While patching holes in drywall can be a problem in other circumstances, because of the cavernous hole behind the wall, you've got it made. The hole has the insulation behind it to serve as a backing for drywall compound. more »

When attaching drywall to the ceiling, it's tempting to slap a coat of drywall compound on the joints, let it dry, then sand and paint. But to get a really smooth finish, take the time to put on a first coat of joint compound, apply taping to the joint and then a second coat over the tape. For the finishing touches, follow the directions below. more »

Sanding drywall compound is a basic necessity that all renters and home owners will probably need to to do at one point in their lives. It's a good do-it-yourself project since it doesn't need a lot of specialized skill, just patience and time. more »

Whether hanging pictures or securing shelving to the wall, it is never recommended to simply use screws, because of the soft drywall compound. Over time, the screws will widen the hole they are in and back out or fall out, which is obviously not what we wish to happen. Using drywall anchors is a fast, safe, sure way to ensure that the screws will remain where they are for a long time to come. more »

Damaged Sheetrock can be difficult and time consuming to repair. Sanding the drywall compound can lead to dust permeating the entire house, and it is often hard to get the patch to blend in with the wall. An easier fix for smaller areas is to install wall plates when plasterboard is damaged. more »

Formica wallboard may be a little tough to remove if it has been glued to the wall on top of being nailed. If this is the case, you will slightly damage the drywall when removing the wallboard. The damage is easily fixed by the use of drywall compound. Basic hand tools are all that you need to remove the wall board. more »