home sectionhome section
After you’ve installed a new pool pump and completed all the plumbing and electrical connections, one very critical procedure remains when you start the pool pump for the first time. To create adequate suction to pull water from the pool, push it through the filter and back to the pool through return lines, the pool pump must be primed. Priming is required when a new pump is installed or whenever air enters the suction and return lines, such as when the water level in the pool is allowed to drop below the skimmers or when a leaky pump O-ring sucks…
You can use products like hydro flush to instantly clear blockages in the circulation lines of a swimming pool. Clear blockages in the circulation lines of a swimming pool with help from a swimming pool and spa industry professional with over twenty years of experience in this free video clip.
Cleaning swimming pool pump motors can have an almost immediate effect on the cleanliness of the pool's water. Clean swimming pool pump motors with help from a swimming pool and spa industry professional with over twenty years of experience in this free video clip.
Attaching a pool vacuum to the filter tank doesn't require the help of an expensive professional. Attach a pool vacuum to the filter tank with help from an experienced swimming pool and spa industry professional in this free video clip.
You'll have to replace the drain plugs in a pool filter every so often as part of your routine maintenance. Replace the drain plugs in a pool filter with help from an experienced swimming pool and spa industry professional in this free video clip.
Removing nitrate from your pool is something you can accomplish through the careful use of the right type of product. Remove nitrate from your pool with help from an experienced swimming pool and spa industry professional in this free video clip.
A clean, well-maintained pool is not only attractive and inviting, but it is also necessary to keep your family safe from harmful microbes. A pool filter is an essential part of keeping your pool clean, along with the appropriate chemicals and manual cleaning. Connecting a filter to your pool is a straightforward task that can be accomplished using flexible PVC pipe. This type of PVC pipe is as strong as regular rigid PVC piping.
Your pool’s drain, called the main drain, has a protective cover that blocks debris from entering the intake line that runs to the pool's pump. The drain is not very big and has a small bucket-like shape with the intake line connected to it. The drain is actually not a standard drain at all, but acts as a connector to the intake line. The drain is at the bottom of your swimming pool and over time its cover can crack or you may need to replace an internal filter. Not all drains have a filter, but they're all required to…
Caring for an in-ground swimming pool is a sizable task, but providing solar heat for one is a surprisingly easy job with the assistance of a common children's play toy. A Hula Hoop covered in black plastic sheeting quickly becomes an effective solar collector. Putting enough of them together to heat up even the largest pool is an inexpensive and fun project for the family.
Installing a 10-foot-by-16-foot rectangle inground pool in your backyard not only provides years of fun and recreational activity, it can also raise the market value of your home. Unlike an above ground pool, an inground pool is a permanent structure that takes some time to plan and install. If you want to install an inground pool yourself, you can use an inground pool kit, which contains all the materials you need to complete the project.
An overlap pool liner is one of the easiest above-ground pool liners to install. The liner is large enough so it is installed in the pool and the liner hangs over the edge of the walls. Installation usually takes at least two people because the liner must be held in place while coping is installed at the top of the pool wall over the liner. Installation only takes a few hours before the pool is ready to fill, assuming that you have already leveled the ground and installed the sand.
Taco manufactures a line of hydronic circulating pumps for household boiler-based hot water heating systems. Taco offers pumps in a range of standard configurations, sizes, flange styles and pumping capacities. These are bolt-in replacements for circulating pumps made by other major heating equipment manufacturers. There are no special pump installation procedures for boilers located in basements. The Taco pump installation process is the same regardless of the boiler's location.
An in-ground pool can be a dream come true for a homeowner. Along with adding value to your home, an in-ground pool can be a place to gather, play and relax for the entire family. Self installing your in-ground pool can save you a considerable amount of money and can be accomplished by purchasing a pool kit. While experienced DIYers may feel comfortable renting a skid loader to excavate the hole for a smaller pool themselves, start with a professionally excavated hole for a larger pool.
As with anything else exposed to moisture and weather, swimming pools wear with age. Replacing a worn part on a swimming pool, such as the aluminum edging on an above ground pool, saves you from the cost and time involved in replacing an entire swimming pool. The simple answer to whether you can replace the aluminum edging on a Doughboy pool is, yes. However, understanding how to replace Doughboy parts requires a more thorough explanation.
Submersible well pumps sit completely underwater and have an intake, electric motor and pump in one unit. These types of well pumps work well in a variety of applications, including pumping water from a creek, lake or standard well shaft. Submersible pumps push water out of wells rather than pull it, and are designed to fit in tight spaces. Removing an above-ground well and replacing it with a submersible pump requires only a few tools and a basic knowledge about well pump systems.
Septic systems are used in remote locations or dwellings that aren't connected to the municipal sewer system. Most septic systems operate by gravity, but where this is not possible, above-ground septic systems are used. These types of systems require the presence of a pump to carry the sewage to the dispersion field. Wiring an above-ground septic system doesn't require any specialized plumbing tools and can be handled by a confident do-it-yourselfer.
Like below-ground septic systems, above-ground septic systems are used in areas that lack access to city sewer lines. Above-ground systems, also called mound systems, are often required for properties with shallow water tables, such as waterfront sites. Because these systems are above ground, a pump is needed to move the sewage in the tank to the dispersion field. Once the pump is installed, you will need to wire it.
Three primary types of pool, spa and hot tub filters exist: sand, cartridge and Diatomaceous Earth, or DE. DE filters, also known as diatomite filters, get coated in an earthen material known as Diatomaceous Earth, hence the name of the filter. This process requires minimal work on your part as a pool owner, and helps trap extremely small particles of dirt, debris and other filth floating in your pool water. DE filters make use of something known as a diatom.
Pool filters are designed to catch and remove debris from a residential or commercial swimming pool. The filter system typically includes several valves, which are responsible for draining out the filter and removing excess air from the filter system during startup or draining. Operating and controlling the valves on the pool filter correctly will help prevent problems and can keep the filter working well.
Above-ground pool liners are constructed from thin plastic that often bow and break under the weight of the water. This is where pool cove pads come in. The coves are installed along the bottom of the pool to prevent the water’s weight from damaging your liner. Install the coves correctly to ensure they remain intact while protecting your above-ground pool’s liner from damage, which could result in a huge mess and a costly replacement.
Installing a corrugated chimney liner is an ideal option when you are retrofitting a chimney. You must install a stainless steel liner, rigid or corrugated, to use your fireplace, wood stove or other appliance. The liner reduces the flue down to a reasonable size so gas and debris can safely vent out of your home. Corrugated steel liners are flexible, which means they expand in response to heat and prevent creosote buildup. Their flexibility makes them easier to extend down the length of your chimney.
The 1997 Volkswagen Jetta was offered with a 1.9-liter four-cylinder turbodiesel, a 2.0-liter four-cylinder gasoline engine or a 2.8-liter gasoline engine. The fuel filters for both gasoline engines are located under the passenger side of the vehicle, directly under the rear passenger seat. The fuel filter for the turbodiesel model is located under the hood on the passenger side of the vehicle, near the coolant expansion tank.
New Jersey has several strict building regulations in force covering the construction of inground pools within its jurisdiction. These requirements are developed with safe and secure pool use in mind and it is an offense to violate the regulations. The bonding requirements for inground pools in New Jersey cover the bonding of the perimeter surfaces, any metal items attached to the pool and any lighting you may choose to install for use with or in the pool itself.
A weir door is a door over your in-ground pool’s skimmer. The door increases the velocity of the water flowing into the skimmer, which in turn allows your skimmer to remove more debris from the surface of your pool. If the weir door is broken or not functioning properly, replacing it with a new door is a quick fix since the weir door on skimmers snaps on and off when needed.
Forget location, layout and curb appeal; a well-built foundation -- footings and wall -- is any home's most important element. Without a solid foundation, it's only a matter of time before seemingly unrelated problems begin popping up: a crack in the wall here, a door that won't close there. The problems only get worse over time. Concrete block is a commonly used foundation material. It is durable, less expensive than poured concrete and relatively easy to install once you get the layout right.
Condensate develops when water vapor in the air turns to liquid after coming in contact with the cold condenser coils of an air conditioner. In homes with central air conditioning, condensate pumps automatically remove condensate water. If a pump fails to operate, damage can occur to metal air ducts and the furnace plenum chamber where the condenser coils are located. You can replace the pump and install a Little Giant condensate pump with a few tools and basic do-it-yourself skills.
Pool filters that use sand are readily available and simple to assemble. For most filters, the installation method is the same or similar, but it is best to consult the owner's manual for the filter system. The retailer you bought the filter from may also be able to help you with the installation. Pool filters use sand to clean impurities and debris from the water pumped into the filter; clean water is then released back into the pool. The sand fulfills the same purpose that it does on a beach, by catching and holding impurities as the water washes over…
Basement windows for bedrooms can be located above or below the ground, but rooms used for eating, sleeping, eating or cooking must have emergency egress. Windows are usually the emergency exit route. The regulations are concerned not only with occupants exiting the house -- emergency personnel, outfitted in safety gear, need to have enough space to enter.
Some pools have a dedicated vacuum line or suction port. This port provides suction when connected to pool cleaning equipment such as a vacuum hose. Leaves, dirt and other debris are sucked through the system and deposited through the pool's filter. If you do not have a vac line, you can hook up pool vacuums to your skimmer system instead.
Many styles of above-ground pools are available today. A steel-frame pool gives the walls the support necessary to support the weight of the water inside the vinyl pool liner. With the proper installation and care, a steel-framed above-ground pool lasts for many years and provides hours of entertainment for your family. Most steel-frame pools are easy to set up. While one person can install a pool, the job goes faster with two or three helpers.
Computing the duration of flight height above the ground requires obtaining values for time, velocity and theta. You must then arithmetically manipulate these values. Use the "define" method for variable initiation, "printf/scanf" methods of data acquirement and mathematical operators such as "*" and "/" in C++.
In the case of pool filters, two are better than one. No matter what types of filters you’re using -- sand, cartridge or diatomaceous earth (DE), or a combination of two -- the more filtration your pool goes through, the cleaner the water will be. If you want to use a combination of filters, use the filter with the larger micron rate followed by one with the smaller micron rate. For example, use a sand filter and then a cartridge or DE filter to get the best results in your pool. If you want to use a cartridge filter, follow…
A 16-by-32-foot oval pool provides a large swimming area for you and your family. Setting up an oval above-ground pool takes more measuring and aligning than a round pool. While it’s possible to set up the frame and vinyl liner on your own, getting some help for the pool installation makes the job go faster. Look for a spot in your backyard that allows you to receive both sun and shade in and around the pool area. Avoid areas where leaves from nearby trees may drop into the water.
The debris basket in a Pentair Water Pool and Spa Dynamo aboveground pool pump, Pentair part #354548, removes debris in the water passing through the pump to help prevent system clogs that slow water flow. It also removes debris to protect the impeller. The basket isn’t held inside the pump housing with any locking mechanisms that require the use of special tools. As a result, replacement simply involves prepping the pump for removal of the basket and accessing the basket in the pump housing.
A leaking pool pump is a clear indicator that something is wrong. Leaks can stem from a variety of problems within the pump, but one of the most common reasons swimming pool pumps leak is because of a worn out O-ring. The O-ring creates a watertight seal between the pump mechanics and the pump lid. Because the O-ring is made of rubber, it will crack and wear out over time. While the best course of action is to replace the worn out O-ring, you can temporarily repair a damaged O-ring with PVC glue until you have time to replace it.
When your bathtub looks worn because of scratches, pits and even cracks on the surface, you can update the look with an acrylic liner. However, because the liner must be custom-fit to your specific tub, you cannot just buy one at a home improvement store -- meaning that the liner must be professionally installed.
Many freshwater swimming pools can be converted to saltwater pools, as long as some professional advice is sought. Those considering a saltwater chlorination system are often concerned about the accelerated corrosion that can occur, but plastic liners are less likely to corrode than other materials. Polymer and plastic-lined pools and pump equipment will last longer than those parts containing metal. In any case, saltwater chlorination is a good option for disinfecting your pool safely.
Above-ground pools provide a simple alternative to in-ground pools. They provide all of the enjoyment without all of the construction and at a fraction of the cost. Aside from the daily maintenance of caring for the water, the upkeep on an above-ground pool is minimal. However, the liner on these pools can shift from time to time and may need adjustment.
Installing a Blue Wave pool is not a difficult task, but it does require that you read and follow the specific directions for your model swimming pool. This hard-sided above-ground pool has a metal track that holds the pool’s walls. Once the track is set in place, the vinyl liner goes inside the pool’s walls. While one person can set up a Blue Wave pool, the job goes faster if you have two or three assistants. Before you begin the pool installation, contact the local building codes office to secure any building permits you may need.
Nothing beats a dip in the pool on a hot summer day to cool you off and leave you feeling refreshed. If you have an above-ground inflatable pool, you must deflate the pool and pack it away when cooler weather arrives. If you originally set up your swimming pool on a grassy surface instead of a deck or patio, you will likely notice an unpleasant odor emanating from beneath your pool when you remove it.
A deep well contains water that is at least 25 feet below the surface. To lift water from a deep well, the installation of a submersible pump is required. There is no benefit to buying a pump that is too large for the system, and in fact, it can end up more costly to do so. It is better to determine your water requirements and calculate the pump sized based on actual need.
Setting up a steel-frame pool with a vinyl pool liner is not a difficult task, but you must read and follow the directions for your specific pool. One person can set up an above-ground pool by himself, but it helps to have two or three helpers, especially when it’s time to install the vinyl pool liner. In most cases, the cleared area surrounding an above-ground pool needs to be at least 1 foot larger than the diameter of the pool to allow for the setup of the pool’s support system.
The Smart Step System is a system of ladders designed to be used with aboveground pools. Manufactured by the Main Access company, the Smart Step System combines two of the company's products into a system that provides easier and safer pool access than any single component. The system can also be customized by adding additional features from the Main Access range of products.
Root cellars have historically been a place to store food in a cool environment before the modern age of electricity and refrigeration. However, they are still used by some people today who wish to live in a simple, environmentally conscious way. While root cellars are typically built underground, it is possible to create an above-ground root cellar with a little creativity and hard work.
If you have a masonry chimney in your home, it is possible for the interior lining to corrode over time. A flexible metal chimney liner helps to prevent corrosion and creosote buildup in the flue. Metalbestos manufactures metal chimney kits that include liners. If you have one of these kits you can install the liner in your chimney yourself. It may require the help of a friend or two, but you won't have to pay a professional.
Your GE dishwasher utilizes a sump to help clean your dishes. The sump fills with water and dish-washing detergent at the beginning of the wash cycle. The dishwasher pumps the water from the sump and through the spray arms. The water continues to pump through the sump and sprayers during the wash cycle. The sump filter catches food particles from dirty dishes to avoid having the water redistribute the debris. When your dishes aren't as clean as they should be at the end of the wash, remove the sump filter to clean and replace it.
Preparing your water lines for winter is critical in protecting the money you have invested in your inground pool. Although you try to empty all the water from the lines, antifreeze works as insurance to prevent any remaining water from racking pipes or valves during the dead of winter. The type of antifreeze you use is very important, since pool-grade antifreeze--propylene glycol--is safe for pool water, unlike automotive or marine antifreeze. The antifreeze needs to be flushed from the lines after winter, before you use the pool the next season.
Hydra Pool manufactures a series of different products for inground swimming pools. The Hydra Pool product line includes polymer panels, coping, steps, braces and vinyl liners. The pool liner is one of the final elements that is set into place during construction of your pool, and proper installation is essential. You can usually install a hydra pool liner with just a few people and a handful of everyday tools.
Clay flue liners are hollow, rectangular tiles that are stacked up and mortared together inside of a chimney. They provide a smooth surface over which smoke can move easily as it rises up the chimney. Without a flue liner, smoke is more likely to leave deposits of creosote on the inside brick surface of the chimney, creating a fire hazard. Over time or as a result of damage, clay flue liners can deteriorate and break, and require replacement.
Replacing the surrounding tiles or area of a pool will give the pool area new life. After years of sun and chlorine exposure, the area around a pool will fade and often crack. This leaves the pool looking old and worn and presents possible areas of water buildup. Even small cracks may grow over time if not replaced. When planning to replace a pool surround, carefully consider the new materials.
