This Season
 
  • Particle board, sometimes called chipboard, is a wood composite material. This type of material is commonly used in mobile homes as an underlayment on top of the subfloor. If you're planning on…

  • Particle board is commonly used on stairs for the tread, or area that is stepped on. It is held in place by nails, screws and adhesive to the stringers, the jagged cut pieces on the side of the…

  • Particle board is a type of building material that is made out of pressed wood and a binder, like glue. Higher quality sheets will have a manufactured wood grain pattern, typically on one side. While…

  • Particleboard is made of a combination of wood shavings, sawdust and resins that are pressed tightly together and heated. It is cost-effective and durable and is frequently used in furniture and…

  • Many furniture items and cabinet units are constructed using veneer-covered particle board. Regions of particle board have a textured surface, whereas the veneer has a smoother finish. Use textured…

  • Particle board is constructed of loose wood shavings and pieces which have been compressed and fastened together with adhesive. The resulting material is a low cost, easily workable sheet, used in…

  • While parquets otherwise install exactly the same as other glue-down hardwood floors, the same rules still apply when it comes to the subfloor itself. While oriented strand board is an acceptable…

  • Particle board is made from wood chips which are glued together with resin and is commonly used to build furniture. The higher the density of the particle board, the sturdier it is. A major advantage…

  • Chip, or particle, board is a form of wood board that combines sawdust with a resin adhesive and uses heat and pressure to produce a solid board. Particle board is a recommended subfloor for many…

  • Particle board is a form of manufactured board created by combining similar-sized wood chips or flakes with a resin-like adhesive and applying pressure to form a solid board. Three basic types of…

  • Particle board is a combination of sawdust, chips and shavings that are glued together, then compressed under high pressure and heat to form a solid slab. Particle board has multiple industrial uses,…

  • Most families own many books, pictures, knick-knacks and other personal belongings. Displaying these items often requires shelving units. Hardwood shelves and bookcases can be expensive. Particle…

  • Regardless of the type of demolition project you are undertaking, there is a significant amount of physical labor involved. This is especially true of particle board floors that need to be removed to…

  • A simple and sturdy design for a storage bed uses cross-mated pieces of lumber to create cubbies, sandwiched between a base and top panel. This results in a neat-looking platform bed, with plenty of…

  • Latex paint is commonly used to cover laminate materials, including particle board coated with a vinyl layer, typically found in low-cost shelving. Latex paint takes several days to properly dry, but…

  • Made of compounded wood particle, particle board serves as a lightweight alternative to wood when building a variety of furniture items. Manufacturers use particle board to construct cabinetry,…

  • Countertops that are covered with a laminate veneer usually have either plywood or particle board as a base underneath the veneer. Each of these materials has advantages and disadvantages. Which one…

  • Particle board is a dense, durable material made primarily of sawdust and shavings of wood. It often is used in subflooring and in other indoor applications. The particle board is held together by…

  • Adequate storage space is a crucial component to keeping your home neat and organized. If you need more shelves in your garage, laundry room or other area of the home, you can build them instead of…

  • Particle board, sometimes used as flooring, is a composite product made from wood particles and a synthetic binder. Particle board is an inexpensive material that is prone to water damage. Replacing…

  • Particle board is made of compressed wood chips and sawdust that are glued together. This material is often used to make inexpensive furniture and cabinets, but it needs some kind of laminate cover…

  • Black mastic is a strong adhesive used to adhere tiles to particleboard flooring. If you remove your tile to find black mastic beneath it, it's a good sign that you're dealing with old tile. Newer…

  • Particle board looks similar to plywood but is different. Instead of being constructed of layers of wood, it's made of pulverized wood that has been glued together and formed into sheets. This…

  • Particle board is comprised of wood chips, saw dust and other small chunks of wood that are glued together. While the material is inexpensive, it is also unable to be used for many projects because it…

  • Creating an antique look is possible, whether your material is real wood or particle board, also known as chipboard, MDF/LDF fiberboard and OSB. Some precautions need to be observed; however, creating…

  • Jazz up the look of inexpensive particle-board cabinets with a finish that distracts from the materials the cabinets are made of and makes them look vintage. The shabby chic painting technique…

  • Because of its cost and weight, particle board is used in a lot of cheap furniture. Unfortunately, particle board is not the most durable of wood boards. One bump, or weight exerted on a shallow nail…

  • Contact paper can visually transform ordinary particle board into all kinds of lavish finishes, from marble to textured hardwood. It also makes an excellent surface inside kitchen cabinets or anywhere…

  • Particle board is a good, solid furniture material, but it generally can’t be sanded and stained. Finding a creative way to refinish a particle board cabinet can be a challenge. One option is a…

  • Particle board is a manufactured wood product created from scraps of wood, shavings and sawdust, pressure treated and pressed into blocks and planes, bound together by synthetic resin. This lumber…

  • Laminate countertops consist of a thin plastic sheet glued to a thicker base. Since the base is not exposed, it typically consists of multiple sheets of particle board. Particle board is similar to…

  • Particle board is a composite made of wood chips, sawdust and adhesive. It is often used because of its low cost, but it has the downside of being difficult to cut cleanly. Particle board tends to…

  • The cost and portability of particle board make it an excellent building material for solving a variety of organizational situations affordably. Building a particle board book shelf can be done with…

  • Laminate countertops are usually made from a particle board framework that the laminate is then bonded to. This type of countertop is rather easy to construct and handle, as opposed to stone or other…

  • Particle board is an engineered wood commonly used for construction of cabinetry, shelving and flat-packed furniture. Particle board is a much cheaper alternative than solid wood for constructing a…

  • If you would like to install tile in a room of your home, the room must have a solid subfloor over which to install it. Any type of flat, sturdy subfloor will suffice as long as it is strong enough to…

  • The sides, back and shelves of most modern kitchen cabinets are constructed of either plywood or particle board, while the faces and doors are made from hardwood and hardwood veneer. The common…

  • Flooring can take a lot of abuse, generally through foot traffic and heavy furniture, and needs to be solid and free from flection to function properly. Occasionally, heavy traffic or environmental…

  • Particle board, also known as press board, is a composite material made from wood chips and various chemicals and resins. These additives bind the particle board together and add a range of desired…

  • Particle board furniture and cabinets are cheaper than traditional wood, but when it comes to updating them or even adding a new coat of paint, that inexpensive option becomes a hassle. Though it may…

  • Particleboard, also known as chipboard, refers to a material used to construct bookshelves, cupboards and drawer chests. The material consists of many pieces of wood chips and shavings pressed…

  • Particle board is a cheap form of processed wood, consisting of small fragments of wood particles such as wood chips, shavings and sawdust. All these pieces form together with a synthetic resin in…

  • Particle board is manufactured board made from wood scraps, saw dust and glue. It's pressed and heat-treated to create a product used in home construction and furniture production. Knowing how to…

  • Transition flooring refers to strips that are installed in doorways or other openings between two different types of flooring. No matter what type of flooring you are coming from or going to, if they…

  • When it comes to tile installations, there are a number of approved substrates. However, not all substrates are created equal, and while OSB (oriented strand board) can be used in certain…

  • Keeping and displaying tanned hides -- the cured skins of animals -- is a way to preserve a portion of an animal. A hide may, for example, be kept by a hunter as a trophy piece or it may simply serve…

  • Thin sheets of plywood are often attached to various pieces of tubing. The tubing can run along the plywood to another location either inside or outside your house. The plywood gives the tubing some…

  • A form of engineered wood, particle board was first developed in Germany by Max Himmelheber after World War II. Before that time sawdust and wood shavings were used only as fuel, but the invention of…

  • Support brackets allow builders to connect tubular components to plywood, lumber and other building materials. Support brackets consist of two, flat flanges surrounding a half-cylinder arch. Screw…

  • Particle board can be used in many different areas of your home. Subfloors, furniture, and shelving can all be made from particle board. Homeowners and woodworkers like particle board because it is…

  • Particle board is a wooden product made from wood chips, dust, flakes and resin. The materials are combined, heated and pressed together to form sheets. This type of subflooring needs to be stored in…

  • Cement subfloors are built directly on top of the soil in the basement or on the first level of your home. They are important structural features because they help keep out moisture and provide…

  • Metal tubing and pipe may need to be mounted to plywood for a variety of reasons. There are several factors to consider. First the tubing must be secured firmly, so that it does not move, even if…

  • Drywall that is five-eighths of an inch thick provides more soundproofing than thinner types of drywall. It also provides an increased degree of fire protection. Local building codes might require you…

  • Particle board is created by compressing saw dust, or wood chips and shavings. It has a wide array of uses around the home and workshop, but cutting it into shape is often marred by its natural…

  • Particle board has been installed in millions of homes across America and around the world. This product is cheaper than the alternatives of plywood and oriented strand board (or glued, molded wood…

  • A wooden subfloor can become uneven for several different reasons. When installing new laminate flooring, the subfloor must be as level as possible. To make the floor level requires identifying the…

  • Particle board is a type of board composed of wood chips and shavings bonded together with resin and pressed into sheets. It comes in 4-by-8 foot sections and is used for many different applications.…

  • Particle board and medium-density fiberboard are both engineered wood products. These products are made from wood remnants, such as wood shavings, sawdust and other fibers leftover from the harvesting…

  • Underlayment is a layer that is installed on top of the plywood subfloor. Its purpose is to provide a flat, consistent base for tile or carpet. Nail guns work well when installing particleboard…

  • Leveling a wooden subfloor will require accessing the floor from underneath. It is also good to have an additional person with you to tell you when each section of the floor is level. This job…

  • Particleboard is an ideal subfloor surface over which to install hardwood flooring, if the area for installation is free of moisture. Since particleboard is so flat, it provides the perfect surface…

  • Metal table edging --- also called metal banding --- is used in bars, restaurant and kitchens in homes. The types of metal table edging available include edges with many grooves and smooth edges.…

  • Particle board is an inexpensive alternative to traditional wood and is often used in mass-produced furniture. It's possible to stain the cheap particle board in your bathroom, provided you use the…

  • Particle board underlayment usually attaches to a plywood subfloor with nails or screws. You might have to remove particle board underlayment if the wood has warped or rotted. This job can only be…

  • Similar to plywood, particle board is a product made of reconstituted wood. Most homes built since the 1940s were likely constructed with at least some particle board. Particle board is nearly as…

  • Laminated particle board is often used to create inexpensive furniture and shelving. If you're purchasing it for a project, finding the perfect shade may be difficult or even impossible. In such…

  • Particle board is a man-made composite wood product that is used as an affordable substitute for more expensive hardwoods. To create particle board, the manufacturer combines wood by-products, such as…

  • Particle board is a wood alternative that is made from wood shavings and sawdust and bonded together with a resin. Particle board is mostly used in furniture because of its lower price and lower…

  • Particle board--as suggested by its name--is made from a combination of sawdust, wood shavings and smaller pieces of wood pressed together and mixed with glue to form a cohesive plank of wood. This…

  • Woodworkers use particle board for making countertops, doors, cupboards and shelves. Carpet fitters use the board to create a level surface and provide an underlayment for flooring. Particle board is…

  • You can improve the look of particle board by installing molding. Particle board is a type of compressed sheathing used on walls or in the mass production of do-it-yourself storage units.…

  • If you buy a piece of furniture built with particle board, you can take steps to eliminate the smell of resin. Resin, a synthetic compound which contains formaldehyde, binds the engineered wood,…

  • Particle board has a naturally decorative and porous surface requiring some basic finishing techniques. A one-part polyurethane protective sealer for a one-step, clear or tinted finish can be applied…

  • Melamine is a type of particle board that has a resin-saturated paper heat-fused to its surface. The result is a pre-finished board that is highly resistant to staining and abrasion. However, the…

  • Particleboard is made by mixing adhesive with small bits and pieces of wood and then forming it into a sheet. Water and moisture causes particleboard to swell and bubble, making replacement necessary.…

  • Particle board tear-out is caused by saw blades. It can be minimized -- but not prevented completely -- by using the right kind of blade. You need to have a backer to prevent fibers from being blown…

  • Many homeowners find particleboard subfloor when they remodel. When it's glued and nailed down, it can be difficult to remove because it's often warped, swelled up or crumbly. You can remove even the…

  • Particleboard is good for many projects. Builders use it mainly for subfloors and stairs. However, people also use particleboard for simple projects, such as building workbenches and desks.…

  • Made up of wood pieces that are pressured together with resin, particleboard is an inexpensive alternative to lumber and is used in many discount furniture items. Many of these items do not come…

  • Cutting laminated particle board---otherwise known as melamine particle core board---can be taxing. It takes a special skill and a steady hand to accomplish the task. You also must take into account…

  • Particle board is one of the most common types of wood used in home repair and building. It's made by mixing small wood particles and resin together and then pressing them into different-size panels…

  • Particle board, made from recycled material, is throughout your house. The recycled material of various sizes bonds with synthetic resin or binder under heat pressure. This creates a sturdy and…

  • Every type of flooring, from carpet to hardwood, requires a flat, clean subfloor surface as a base, referred to as "underlayment." There are many available underlayment products, both wood and…

  • Wood flooring is normally nailed to a plywood underlayment. But if your underlayment is particleboard, this isn't a good approach. Unlike plywood, which is sheets of wood pressed together,…

  • Particle board, also known as chip board, looks like real wood but is not. Particle board is actually a composite of wood materials, such as sawdust. When the wood pieces and other ingredients are…

  • Particleboard, also referred to as fiberboard, is composed of wood chips or wood shavings resined and compressed together. Although not as strong as solid wood, particleboard is a much cheaper…

  • Removing particle board is properly described as tearing it up. Particle board that has come into contact with moisture will have little structural strength and often crumbles into small pieces.…

  • Unfinished particleboard shelves, which are made from bound compositions of small bits of wood, are often a challenge to clean because the wood is porous and sometimes coarse in texture. It is…

  • The toilet in a bathroom isn't the most pleasant feature of the home, and as a result may be ignored except for on cleaning day. This doesn't have to be the case, and you can incorporate the toilet…

  • Particle board flooring will need to be removed and replaced anytime the particle board becomes rotted by water damage or invaded by pests, or you simply would like to put in a different flooring…

  • Particle board is a sheet good made from wood byproducts that is widely used in residential construction. Favored by professionals and by do-it-yourselfers because it is relatively cheap and easy to…

  • Particleboard is a budget-friendly option for cabinets, which is why most homeowners who are on a tight budget use it when renovating their kitchen, bathroom and storage cabinets. Sometimes, however,…

  • Edging, or edge banding, is typically used to finish a laminate counter or shelf that uses a particle board or plywood substrate. PVC is one most commonly-used plastics for fabricating edge bandings,…

  • If you own a poor-quality television stand, you may know the frustration of watching such furniture fall apart. It might wobble a bit under its load, or feel cheap. It probably doesn't match your…

  • Particle board is a common, but highly unstable, wood composite material. As long as it is completely sealed from moisture, and protected from impact, it can be used as a filler in some building…

  • If a drawer is broken in your existing cabinets, you can build a new drawer with a roller using simple tools. Because you cannot go to a local store and purchase a drawer for your cabinet, a cabinet…

  • Particleboard consists of various sizes of wood particles that have been bonded together using resin, pressure and heat. One use for particle board is subflooring. Subflooring serves as a base for the…

  • Particle board is a medium commonly found in decor pieces and furniture. It is often considered a "green" product because it's made of scraps of wood that might otherwise be wasted. Because of its…

  • Adding shelves in the laundry area provides extra storage space and reduces clutter. Options for adding shelves run from simple to complex; the easiest and cheapest method is to create simple…

  • Particle board's density creates a firm, flat surface for installing carpet or vinyl flooring. Installing particle board to a cement subfloor is a bit more challenging than installing the material…

  • Whether you're laying tile or putting down carpet, particle board is one option you can use for an underlayment underneath your flooring. Particle board is made from small particles of wood that have…

  • Particle board and similar products are usually produced or reconstituted lumber products as opposed to solid timber. These types of materials were launched to the building sector around the 1940s and…

  • The floor is an integral part of the structural engineering of a house. It supports the majority of the weight. A subfloor provides structural support for the floor system, and underlayment is…

  • A number of factors probably went into the selection of your particle board cabinets. Price and appearance were among them. You also may have liked the color and finish. As with all things homeowners…

  • The subfloor is the floor below the main floor surface. It rides on top of the floor jousts and is the first solid barrier to the floor or area below it. After the particle subfloor is laid down, the…

  • Particle board is made from fine wood particles mixed with a resin and compressed into sheets. It's very consistent, perfectly flat and cuts easily. Real wood is comprised of connecting fibers. These…

  • Particle board consists of bits of wood glued together. Find the density of the particle board by using the size and weight. Measurements of density for particle board indicate whether the material…

  • Veneer particle board is made from wood scraps fused together to form sheets of lumber. The lumber is covered with a piece of laminate or veneer that simulates real wood. This material is typically…

  • Maybe you inherited an old cabinet that has no shelves, or maybe you have a cabinet with shelves but you want to add more. Either way, your home, garage, kitchen or shed will look much more tidy if…

  • Particle board is an engineered, manufactured wood product that was first introduced to the building industry in the 1940s. A hot-pressed composite made from wood flakes, chips, splinters, shavings,…

  • Particle board is a very inexpensive alternative to natural hardwood or pressed plywood. It is sturdy under most conditions, but once it becomes wet it will never hold weight again. Many builders save…

  • Particle board cabinets are generally less expensive than solid wood cabinets but they are more easily damaged and tend to show signs of wear much more quickly. If replacing your particle board…

  • Solid core doors are found on the majority of commercial openings as well as most home entryways. These doors may feel like one piece of lumber, but are actually made from many layers of material.…

  • Manufacturers don't recommend laying linoleum over a particle-board subfloor. Particle-board is a blend of particles of wood that have been compressed and glued together with resin. Over time, this…

  • According to the Composite Panel Association, particle board is "a composite panel product consisting of cellulosic particles of various sizes that are bonded together with a synthetic resin or binder…

  • Swelling in particle board kitchen cabinets occurs when moisture seeps into the board, whether because of immersion in water or extreme humidity. Different types of particle board react differently to…

  • Particle board is a reconstituted wood product used to some degree in most modern-day construction projects. Though care must be taken to ensure moisture cannot access it, particle board has proved to…

  • Mold is both unsightly and potentially hazardous to those who come in contact with it. Mold grows in damp, dark places and is a common occurrence after a flood. Mold can grow on just about any…

  • Particle board is a type of man-made wood sheeting that is commonly made by pressing together wood shavings, sawdust and a formaldehyde-based resin. Production of particle board in the United States…

  • Particle board is simply bits of wood that are fused together into a sheet. Particle board is used for shelving and other types of furniture. It typically has a plastic veneer sheet over the top of it…

  • Most kitchen cabinet sets are usually made with the same construction process. By knowing what to look for in the best and most durable materials and procedures, you can find a quality kitchen cabinet…

  • Newer bonding formulas have made it possible to create solid adhesion between tiles and particle board, but according to the Ceramic Tile Institute of America, particle board and plywood, due to their…

  • Particle board is a composite product, meaning that it is made up of two or more materials. A synthetic resin holds the particles together to create the board. It used to be flimsy and break easily.…

  • Particle board furniture is inexpensive and easy-to-find, but doesn't always keep looking good. Imitation-wood-effect and laminate-coated particle board are easy to scuff, stain and ding. Many people…

  • Loft garage projects will add value to your home by increasing storage space, adding to your living quarters, providing a quiet getaway for an artist or writer or giving the cats a place to hang out.…

  • Cement countertops are an attractive surface to have in a kitchen or in a patio. They are cool in temperature, are not easily stained by water or other liquids and cannot be damaged by anything hot…

  • When you glue veneer to particle board, you get the beautiful high quality look of expensive solid wood for any woodworking project at a reduced cost. Even beginners who have never attempted to reduce…

  • Melamine particle core board (MPCB) has a melamine resin surface that is easy to clean. Because it wipes clean so readily, it's often used for cabinets and shelving. Though melamine particle board is…

  • Purchasing new cupboards for your home can enhance your living space by brightening up a room and creating more storage space. New cupboards are available in a wide variety of styles, colors and sizes…

  • Particle board is sawdust, wood shavings and very small wood scraps that are pressed together with glue. It's good for use as a base for wood projects, generally with veneer, laminate or other…

  • Particle board cabinets that are covered with a wood grain look vinyl usually start showing signs of wear and tear within 2 or 3 years. The nature of particle board cabinets in kitchens and baths is…

  • MDF is short for medium density fiberboard. MDF and particleboard are two forms of inexpensive wood-based sheet goods used by home and furniture builders, sometimes as substitutes for plywood.

  • Particle board is less than ideal for cabinet construction but many of us are stuck with it due to budgetary constraints. How do we make the most of aging particle board cabinets? Keeping the finish…

  • Pieces of wood fiber glued together create a cheap material known as particle board. The amount of moisture from the glue adds to the weight of this product when compared with lumber. Determine the…

  • Particle board is a composite product. It is manufactured by mixing waste-wood products, such as sawdust, wood chips or sawmill shavings, with a synthetic resin or another type of binder.

  • Installing carpet directly over particle board sub-floor used to be industry standard, but these days it's frowned upon. Particle board is often used as a sub-floor because it is cheap and generally…

  • Melamine particle board is a material commonly found in inexpensive, pre-made furniture. While melamine has been in use for a while it remains an inexpensive and fairly durable way to add colors or…

  • You want to install new flooring in your kitchen or another area of your house. You have your new flooring and you are ready to tackle the floor project. One problem: the current flooring is particle…

  • Particle board, which is pressed sheets of wood shavings and sawdust, is often used as subflooring and wall backing. Hard tile should never be mounted directly on particle board in a bathroom because…

  • A particle board subfloor may have one or more spots where there are detectable dips, wells or undulations. Subfloor is intended to be covered with padding and carpet, or overlaid with finished…

  • Kitchens need a face-lift sometimes. Adding a new finish or color to your cabinets can be a great way to add life to a room that needs energy and sees a lot of action. Particleboard cabinets can be a…

  • There are several different choices for do-it-yourself countertops. Some will save you more money than others, while costlier ones will provide more beauty. Selecting which type depends upon your…

  • Bead board is a traditional grooved paneling that is most often 32 to 36 inches in height. It was used in older homes to protect the fragile plaster; now, however, it is most often used to add…

  • Particle board is usually installed over the top of a plywood sub floor. It gives extra strength to a floor that will be carpeted, and it allows for several installations of flooring without damaging…

  • A corner TV console takes up less space than a square or rectangular console, since it "wedges" into the corner. If you can build your own furniture pieces, you can build a corner TV console out of…

  • Tanning cowhides is a tremendous amount of work. If you are new to cowhide tanning, it is recommended that you begin with a small hide or even a portion of a hide.Decide whether you want to tan your…