Cheap Ways to Get Rid of Hard Water

Save
Hard water contains mineral salts, which can make forming soap lather quite difficult.
Hard water contains mineral salts, which can make forming soap lather quite difficult. (Image: tap image by BlueMiniu from Fotolia.com)

Hard water, which contains high levels of mineral salts, is one of the most common problems homeowners face. Though not a health hazard, hard water can cause mineral deposits and limit the ability to form a lather when combined with soap. While getting rid of hard water is not necessarily difficult, it can be a rather expensive process. Fortunately, you don't have to spend a week's pay to do it, as there are a few inexpensive methods that will work perfectly.

Ion Exchange Water Softener

The most common way of dealing with hard water is to use an ion exchange water softener. This system uses two tanks (resin tank and salt tank) that work to soften the water by striping it of magnesium and calcium ions. While ion exchange water softening systems are effective, many people claim that the salt tank leeches trace amounts of sodium into the water, which can be a problem for people who have to watch their salt intake. Purchasing and installing an ion exchange water softening system cost between $400-$1,000. All in all, however, there is no more effective hard water treatment than an ion exchange water softener.

Polyphosphate Feeders

Polyphosphate feeders are an excellent alternative to ion exchange water softeners. As the water passes through a host of polyphosphate crystals, the minerals in the water (iron, magnesium, calcium) get coated in polyphosphate, which effectively reduces the hardness of the water. This is an effective and inexpensive ($150-$300) solution for homeowners with city water, but those with well water may want to look elsewhere, as polyphosphate can encourage the growth of bacteria.

Boiling

For those who have slightly hard water, simply boiling it may be the most cost-effective solution available. Boiling hard water can cause the minerals to deposit themselves at the bottom of the kettle, effectively creating soft water that is ready to use. Note that this method is not likely to work if the mineral content of your water is extremely high.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

4 Credit Myths That Are Absolutely False

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!