Tractor 574 International Specifications

••• Photos.com/Photos.com/Getty Images

International Harvester manufactured the 574 model agricultural tractor in Doncaster, England, between the years 1970 and 1978. The last International Harvester model, manufactured in 1978, had a $10,000 price tag.

Engine Specs

International Harvester’s 574-model agricultural tractor was fitted with either one of two available engines. One engine runs on regular gasoline while the other was designed to run on diesel fuel. The gas-powered engine is an International Harvester model-C200 engine. This engine features a 3.81-inch by 4.39-inch bore and stroke and a 200.3 cubic-inch piston displacement. The C200 engine is a four-cylinder, liquid-cooled engine with a natural aspiration. The compression ratio on this engine is 7.33:1. The diesel-fueled engine is an International Harvester model-D239 engine. This engine features a 3.87-inch by 5.06-inch bore and stroke and a 238.6 cubic-inch displacement. International Harvester’s D239 liquid-cooled engine offers four cylinders and a natural aspiration. The compression ratio on the D239 engine is 12:1.

Weights & Dimensions

Models of the International Harvester 574 tractor fitted with the C200 gas engine weigh 4,835 pounds while the International Harvester 574 tractors fitted with the D239 engine weigh a total of 5,150 pounds. Regardless of which engine they are designed with, all models of 574 agricultural tractors are 135 inches long and 91 inches tall with an 85.4-inch wheelbase. This tractor employs 14.9-28 rear agricultural tires and 6.50-16.0 front agricultural tires.

Performance

The gas-powered 574 tractors offer different performance levels than the diesel-powered tractors. Testing found that the gas 574s offer 52.97 horsepower. These models used fuel at a rate of around 4.7 gallons per hour. They also produced 44.03 horsepower of drawbar power and are capable of pulling a maximum 6,360-pound load. Testing found that the diesel models of International Harvester’s 574 tractor produce 52.55 horsepower outputs and 45.85 horsepower drawbar power. Max drawbar pull presented by this engine is 6,446 pounds. These engines burn up fuel at a rate of 3.6 gallons per hour.

Other Specs

These models of agricultural tractor are fitted with a fuel tank that offers a 20.34-gallon fuel capacity. International Harvester’s 574 features a synchromesh transmission that offers eight forward and four reverse gears. The hydraulic system on this tractor is designed to pump hydraulic fluid at an 11.9 gallon-per-minute rate. These tractors are fitted with hydraulic wet disc brakes.

Related Articles

Lycoming Engine Specifications
Mustang Skid Loader Specifications
Cub Cadet Model 1330 Specifications
Case 1070 Tractor Specifications
Specifications for the Case 570MXT Loader
Specifications on a Mitsubishi MT372
Lycoming Engine Specifications
Types of Marine Diesel Engines
How to Convert HP to BTU/hr
Uses of Diesel Oil
How to Convert Horsepower to kWh
What are Gehl 4625 Skid Steer Specifications?
How to Convert Horsepower to Foot Pounds
How to Calculate Dead Weight
Alternative Fuels Used in Vehicles
How to Calculate Effective Capacity and Efficiency
What Is the Difference Between an R410 and an R22 Compressor?
How to Convert MPa to N/mm^2
Tecumseh Carburetor Identification