Buick LT1's Specifications

Save

The LT1 was a small-block engine manufactured by General Motors. It replaced the L98 engine, and produced better mileage and torque and had 20 percent more horsepower. The LT1 was first placed in the 1992 Corvette. In 1994, the engine was placed in the Buick Roadmaster. The LT1 was manufactured until 1997, when it was replaced by the LS1.

  • The Buick's LT1 motor was slightly different from the LT1 placed in the Corvette. The Buick 5.7-liter engine came with two-bolt mains and cast-iron heads, while the Corvette's had four-bolt mains and aluminum heads. The Buick LT1 produced 265 horsepower, 40 horses less than the Corvette's engine, but weighed much less.

  • The LT1 uses a reverse-flow engine-cooling system. This means that coolant flows from the heads down through the block. This keeps the heads cooler and allows higher and more consistent cylinder temperatures. The LT1 does not need a special radiator, but it does need an overflow tank to make sure that there is no air in the system.

  • In 1994, a sequential port injection was added. The following year, the distributor was enlarged and received a drain tube to remove excess moisture. Then, in 1996, the LT1 received a second catalytic converter and an extra 10 horsepower.

  • General Motors also manufactured a 4.3-liter engine called the L99, which is a virtual lookalike of the LT1. The easiest way to differentiate between the two engines is to check on the block. Look in front of the bellhousing mount. It will be marked with either 5.7L or 4.3L.

References

Promoted By Zergnet

Comments

You May Also Like

  • Where Is the Fuel Pump Relay Located?

    The fuel-pump relay unit is responsible for turning the fuel pump on when it detects the engine is running. When the ignition...

  • The Specs for a 1993 Buick Roadmaster Engine

    With a length of more than 215 inches and a curb weight of more than two tons, the 1993 Buick Roadmaster is...

  • How to Add Engine Coolant in a 1994 Buick

    Maintaining proper radiator coolant levels in your 1994 Buick prevents engine overheating. All General Motors vehicles use a specific brand of antifreeze...

  • Average Salary for a Top Fuel Engine Builder

    "Top fuel" refers to the nitro methane mix that powers dragster-style racing engines. These fastest accelerating vehicles in the world are capable...

  • Symptoms of a Wrong Firing Order

    There are several steps in the firing of a cylinder in an internal combustion engine. With a piston starting at the top,...

  • LT1 and LT4 Differences

    The LT4 was a special high-performance version of the LT1, a two-valve, pushrod 350-cubic inch V8 engine manufactured by General Motors. While...

  • 1994 LT1 Engine Specifications

    The Chevy LT-1 was released in 1992 as the second generation of small-block General Motors V8s. This version of the LT-1 lasted...

  • 94 LT1 Cam Specifications

    The LT-series V8 was the last and perhaps greatest incarnation of Chevrolet's history-making small block. The traditional small block saw continuous production...

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!