Jenn-Air JDB-5 Dishwasher Specifications

Save

The Jenn Air JDB 5 Dishwasher is available in two and three rack versions. Some models have touchpad controls while others have a cycle selector knob. All models have a safety feature whereby they switch off if the start/cancel control is not activated within 30 seconds of the dishwashing cycle being selected.

Diswasher Capacity

  • A two rack Jennair JDB-5 can take a full 10 place dinner service including glasses. However, if the full service is being washed at once pots, pans and serving dishes will have to be washed separately. A three rack Jennair JDB-5 can take a full 10 place service with pots, pans and serving dishes on the bottom rack. Other features such as special stacking areas to create more capacity depend on the model of JDB-5 you are using.

Detergent and Rinse Aid Dispensers

  • The rinse aid dispenser is located beside the detergent dispenser. There is an indicator on the dispenser that shows when it needs to refilled.

Heavy Wash Program

  • The heavy wash program lasts 132 minutes and gives the load two washes and three rinses.

Normal Wash

  • The normal wash program lasts between 97 and 112 minutes depending on the level of soiling detected by the dishwasher. This determines whether one or two washes or one or two rinses are used.

China/Crystal Program

  • This cycle is for items with light food soiling. It lasts 82 minutes and includes one wash and two rinses.

Sensor Clean Program

  • During this program, which is featured in selected models of the JDB-5 only, the machine's soiling sensor determines how many fills of water is needed for each load. The program lasts between 94 and 128 minutes and involves either one or two washes and two or three rinses.

Rinse Program

Quick Wash

  • This program is for lightly soiled loads and involves one wash and two rinses. It takes 38 minutes to complete.

Super Scrub

  • The Super Scrub feature is designed to cope with loads with food soiling that is hard to remove. It adds either heat or wash time depending on which cycle has been selected.

Heated Dry

  • Selection of this option gives enhanced drying results. Jennair says some items may require towel drying if this is not activated.

Water Temperature

  • The hot water taken into your JDB-5 should be at least 120 degrees Fahrenheit to activate the detergent and effectively deal with soiling on the dishes. If it is not, programs may take longer as the machine brings the water up to the required temperature.

Dishwasher Dimensions

  • The Jenn-Air website gives the following dimensions for its tall tub dishwashers: Height 34.5 inches; width 23 and seven eighths inches; Depth 26.5 inches.

References

  • Photo Credit Paul Viant/Photodisc/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Use JB Weld

    JB Weld may very well be the greatest thing since mechanics' wire and wire tie wraps. If you need to repair something...

  • How to Troubleshoot a Jenn-Air Oven

    Among its lineup of high-end refrigerators, cooktops and dishwashers, Jenn-Air -- the company that introduced convection cooking to the home kitchen --...

  • How to Troubleshoot a Jenn Air Refrigerator

    Jenn-Air has 24 refrigerators to choose from. Many of them can be fully integrated into the kitchen with flush, built-in design. Panel...

  • How to Troubleshoot a Jenn-Air Dishwasher

    Jenn-Air is a brand name of household appliances manufactured and distributed by the Whirlpool Corporation. Dishwashers are one of the household appliances...

  • How to Unclog a Jenn-Air Dishwasher

    Jenn-Air dishwashers come in a number of models, with various features including sanitizing wash, large racks, quiet motors, specific cycles for certain...

  • Jenn-Air Grill Troubleshooting

    Jenn-Air grills offer solid, well-built work stations for outdoor cooking and entertaining. They are designed to provide excellent service and will continue...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!