The Best Replacement Windows to Buy for Cold Climates

Save

Old or damaged window units can increase the rate of heat loss within a home or building during cold, winter months. Not only is this uncomfortable for you and your family, but it also increases energy bills. Replacing these windows with new, energy efficient windows can reduce the heat loss within a home or building. Although these windows are more expensive than normal windows, they can cut heat loss in half during cold months and therefore reduce heating needs and keep overall costs from accumulating later on.

Ratings

  • Before installing a new window, it is important to understand the different energy ratings and what they mean. The "U-Factor" of a window refers to the rate at which it conducts non-solar heat flow. The lower the U-factor number the higher the window energy efficiency level. The "Solar Heat Gain Coefficient" (SHGC) refers to the level of solar radiation absorbed. A window with a high SHGC rating will more efficiently collect and transmit solar heat into a building during the winter. The Visible Transmittance (VT) window rating corresponds to the amount of visible light that is permitted to enter a building or home.

Energy Efficiency Technology

  • To increase energy efficiency, windows can be filled between the glass panes with an inert gas, such as argon or krypton. Inert gasses do not conduct heat transfer as much as air. Argon is a third less conductive of heat transfer than air, and krypton, though more expensive than argon, is even better. Special heat absorbing window-glazing tints can also be used. In cold climates, a special black-tint should be used to absorb and produce more solar heat within a building. Insulated windows, or storm windows, can reduce the loss of heat from within a building. Spectrally selective window glazing reflects unwanted wavelengths while permitting others; this glazing can be customized to fit specific climates or aesthetic needs. Also, low-emissivity (Low-E) window glazing can reduce solar heat loss in cold climates. Low-E window glazing can reduce energy loss by 50 percent. This glazing is extremely thin. In a cold climate, the Low-E glazing should be applied to the inside window pane.

Window Frames

  • Aluminum or metal window frames have a high conduction rate and therefore are not good at insulating. Composite frames are made from composite wood products. Perhaps slightly better than regular wood frames, composite frames are more stable and they resist moisture and decay. Fiberglass frames have air cavities. These air cavities can be filled with an insulation product to enhance insulating capabilities. Vinyl frames are typically made from PVC and this material offers good insulation. However, at exceptionally cold temperatures, vinyl frames have the potential to crack. Insulated vinyl frames can also be purchased. These frames are similar to fiberglass frames, in that they have a small air cavity that is filled with insulation to improve insulating efficiency. Wood window frames offer decent insulation capabilities, however wood frames can warp with shifting temperature and humidity.

Desired Windows in Cold Climates

  • An effective window in a cold climate would be south-facing to absorb the sun's heat and would have an SHGC rating equal to or greater than .6 to allow solar heat gain to enter the building. A U-factor of .35 or less to negate heat transfer is desired while a VT level to permit the entrance of visible light is also preferred. Using a window with argon or krypton between two panes of glass would greatly reduce heat loss during cold months. A customized spectrally selective window glazing could be installed to fit a specific cold climate and a Low-E glazing could also be used to further reduce heat loss. A good window frame in cold climates would be an insulated vinyl or fiberglass frame that can be filled with an insulator.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • Vinyl vs. Wood Windows

    Vinyl windows and wood windows both have their advantages and disadvantages, when it comes to maintenance and appearance. Vinyl windows are generally...

  • Caulk for Extreme Temperatures

    Caulk is a substance used to provide insulation, as well as seal cracks and crevices around doors and windows. Most caulks will...

  • How to Buy Replacement Windows

    New windows can really improve the look of an older home while also improving energy efficiency.

  • How to Buy Blinds

    Blinds are a popular window treatment choice because of their durability, affordability and appearance. With so many styles and materials to choose...

  • How to Buy Hurricane Windows

    If you live in a hurricane-prone region, consider investing in hurricane windows to protect your home and family from hurricane-force winds. Unlike...

  • How to Buy a Kitchen Garden Window Online

    A kitchen garden window replaces a flat kitchen window with a four-panel window box. Usually this window serves as a small greenhouse...

  • Cold Weather Window Treatments

    In cold weather, windows are the largest source of heat loss in homes. Walls have an insulating capacity of R12 to R40...

  • The Best Rated Windows for a House

    Windows account for 8 percent to 10 percent of the cost of a new house, according to This Old House. Whether you're...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!