Plan the perfect garden with our interactive tool →

How to Remove a Stone Wall

...
stone wall image by Inger Anne Hulbækdal from Fotolia.com

Tip

Work on the mortar, not the stones, with the sledge and chisel. Stone walls where the mortar has deteriorated make the project much easier but may pose some dangers if the mortar is loose to the point that stones fall from the wall easily.

Warning

In some historic districts, the removal of stone walls without a permit is prohibited. Consult local zoning and building regulations before starting the stone wall removal project. Always wear adequate personal protection equipment including steel-toed shoes, safety goggles and heavy gloves.

Both decorative and sometimes utilitarian, stone walls or fences do deteriorate. Removal of the stone wall or fence may be necessary due to the failure of the wall or the changing needs of the homeowner. The project requires hard work, muscle and some heavy tools, but it can be accomplished by the do-it-yourselfer.

Check the stone wall and confirm it does not support other structures. Stone foundation walls obviously support the house or barn above them. Landscape retaining walls hold dirt behind them, keeping hillsides from shifting and eroding toward the lower ground. Stone walls and fences can be removed in these situations, if necessary, but steps will need to be taken to replace the support provided by the stone wall.

Break the mortar between stones at the top of the wall. Use a sledgehammer and chisel to break up the cement mortar between the stones and remove the stones as they become loose. Remove the loose stones as soon as possible to prevent them from falling from the wall and causing potential injury. Wear safety goggles and heavy leather work gloves while chiseling the mortar.

Remove loose stones from the work area with a wheelbarrow or other implement. Park a truck or pickup near the work area, if possible, and place the stones in the truck for easier removal.

Break the mortar between more stones as you continue to work down the stone wall or fence. Remove the stones until you reach the base or the foundation of the stone wall.

Break up the foundation below the stone wall, if necessary. Some stone walls are constructed on a solid concrete footing. Use the sledgehammer and chisel to break up small footings. The removal of large footings may require the use of a jackhammer.

Related Articles

How to Calculate a Stone Retaining Wall
How to Calculate a Stone Retaining Wall
Fixing a Rotted Sill Plate in a Garage
Fixing a Rotted Sill Plate in a Garage
How to Set Stone Pavers With Mortar
How to Set Stone Pavers With Mortar
How to Get Rid of Retaining Walls
How to Get Rid of Retaining Walls
How to Replace Pool Coping on an Inground Pool
How to Replace Pool Coping on an Inground Pool
How to Install a Crushed Stone Driveway
How to Install a Crushed Stone Driveway
How to Clean Landscaping Stones
How to Clean Landscaping Stones
How to Stack Pavers
How to Stack Pavers
How to Change the Self Propelled Belt on a Toro
How to Change the Self Propelled Belt on a Toro
How to Tear Down a Block Wall
How to Tear Down a Block Wall
How to Move a Utility Pole
How to Move a Utility Pole
How do I Remove the 38-Inch Mower Deck on a John Deere LT155 Riding Mower?
How do I Remove the 38-Inch Mower Deck on a John Deere...
How to Glue Wall Stone
How to Glue Wall Stone
Garden Guides
×