The Briggs and Stratton Vanguard 20 horsepower (HP) engine is available in either a horizontal crankshaft configuration or a vertical crankshaft configuration. Vertical crankshafts extend below the engine and are frequently used to power lawnmower type devices where the mechanism powered by the engine sits below the engine. Horizontal crankshaft engines extend the power to the side of the engine. Vanguard series engines are designed for continuous, heavy duty applications.
The cylinder in the Vanguard 20 HP engine has a 2.83-inch bore with a 2.76-inch stroke for a total engine capacity of 570 cubic centimeters (cc). As the model name indicates, the 570cc engine produces 20 HP.
The engine is lubricated using standard motor oils. The engine requires 1.4 liters (l), or 48 fluid ounces, of oil for proper lubrication. The Vanguard 20 HP uses full pressure lubrication and features a spin-on oil filter.
The Vanguard 20 HP uses overhead valves. Overhead valves allow the engine to operate at a lower temperature and also increase the valve lifespan.
Unlike other engines, the Vanguard series of engines uses a cast iron cylinder sleeve. Cast iron wears better and has less of a tendency to warp under high heat. Cast iron cylinders help to reduce heat problems and increases the usable lifespan of the engine.
Carburetor and Fuel Tank
The Vanguard 20 HP is designed to use a remotely mounted fuel tank. It uses a float-feed carburetor with a built-in fuel pump. This allows a the engine to be used with a wide range of fuel tanks.
The Briggs and Stratton Vanguard 20 HP engine is nearly 10 1/2 inches by 16 inches by nearly 18 inches including the crankshaft. Depending on the crankshaft configuration, the engine weighs either 81 or 89 pounds.
- Photo Credit TONDEUSE AUTOPORTEE ref 1400 image by Marie-ThÃ©rÃ¨se GUIHAL from Fotolia.com
How to Change the Oil in a Briggs & Stratton Vanguard 18HP
The 18-HP Vanguard Briggs and Stratton engine features a full-pressurized lubrication system. The oil in any engine acts as the lubricant to...
Briggs & Stratton 22 HP Twin Torque Specifications
The Briggs & Stratton Intek V-Twin Engine is a member of the company's Professional Series of small engines. Primarily used in garden...
- B&S Engine Specs
Briggs & Stratton 26 HP Engine Specs
Briggs & Stratton's Professional V-Twin Engines are designed primarily for use on commercial riding lawnmowers. They are designed with a range of...
Briggs & Stratton 16 HP OHV Specs
The Briggs and Stratton engines that produce 16 horsepower are the vertical and horizontal 14-16 Gross HP V-Twin Horizontal & Vertical Shaft...
Briggs & Stratton Valve Specs
Briggs and Stratton is one of the world's largest manufacturers of small gasoline-powered engines, most commonly used in lawn mowers, but also...
Briggs & Stratton Oil Change Procedures
It is very important that you change the oil in a Briggs & Stratton four-cycle engine to keep it running at peak...