Homeowners stain wood decks to seal them from moisture, which can cause wood to crack and rot. Homeowners also use stain to preserve a deck's natural wood appearance. Behr wood stain is a product sold by home improvement stores. Behr stain comes in a variety of color options and a transparent finish. Although the stain generally performs well, problems have been reported by consumers.
Requires Tedious Preparation
Behr recommends consumers prepare the deck before stain is applied. This includes removing mold, debris, and residue that may have stained the deck. Behr suggests several of its own products for homeowners to use for this preparation, including stain strippers and mildew removers. Depending on the age of your deck and its condition, the preparation process may be tedious, time consuming, and expensive if you buy all the products Behr suggests.
Makes Deck Sticky
Behr stains require two applications to achieve the desired color and seal. Homeowners must apply the second coat within 48 hours of the first, in temperature-specific conditions (i.e., between 40 and 90 degrees Fahrenheit with no rain for at least 24 hours upon completing the final coat). In spite of following these explicit instructions, a homeowner noted on One Project Closer, a do-it-yourself website, that the deck felt sticky for up to three weeks after staining. The homeowner noted that even though he applied the second coat within 46 hours of the first coat, the deck took a long time to dry. As a result, the homeowner suggests applying both coats on the same day to lessen dry time.
Does Not Match the Stain Swatch on the Can
The homeowner who recorded his experience using Behr stain on One Project Closer also found that the stain swatch on the can did not match the color of the deck after the stain was applied. He found that the color looked much darker when applied to the deck. He also said the stain gave the deck an orange hue contrary to the natural look he wanted.
Consumer Search, a consumer product review website, found in its examination of consumer reviews posted on other websites that consumers are not pleased with the performance of Behr wood stains. Consumers find the stain thin. After it is applied, consumers note that it tends to peel, exposing the wood underneath.
- Photo Credit Jupiterimages/BananaStock/Getty Images
Color Chart of Wood Stains
Wood stain charts should be viewed as guidelines, indicating what to expect for a given product. All types of stains, no matter...
Wood Stain Problems
Wood stain problems are almost always attributable to improper surface preparation. Undervalued by many amateur do-it-yourselfers, preparation is a critical part of...
How to Remove a Sticky Stain From a Deck
Outdoor decks are prone to a lot of wear and tear. They are rained on, heated by the sun and beaten up...
How to Stain Your Wooden Deck
Wood decks require staining every one to three years to maintain their beauty and withstand the elements. The best time to stain...
How to Apply Cabot Deck Stain
A stained wooden deck can almost serve as a outdoor living room if it is comfortably furnished and properly maintained. Staining decks...
How to Repair Peeling Behr Concrete Stain
Peeling Behr concrete stain can be repaired fairly easily. Peeling problems are usually due to faulty surface preparation. Once the peeling and...
How to Apply a Semi Transparent Concrete Stain
Whether it's the patio or the floor of your garage or an interior room, if it's concrete then it's probably the typical...
How to Use Behr Concrete Stains
Whether you are installing a new concrete patio, driveway or walkway or updating an existing concrete surface, concrete stain makes a dramatic...
Stain Peeling From a Wood Deck
Deck stains reveal the natural grain of the wood and sometimes offer much-needed color. Unfortunately, for a variety of reasons, the stain...
Deck Stain Colors
While natural wood or cedar tone is a common choice for a deck stain color, you have many options. If you choose...