The CV (Constant Velocity) axle is a very important component in most rear- and front-wheel drive vehicles. By connecting two fixed rotating shafts with a set of CV joints, the axle maintains steering stability while handling the ups and downs from the vehicle's suspension. Either through time or damage, the axle can begin to fail and will produce a few warning signs.
Vibration and Shudders
As the joints on the CV axle begin to erode, they can create blind or hard spots. When this happens, the axle will bind up while making turns and during vehicle acceleration. This can result in vibration or shuddering in the front suspension area that will move quickly through the car during acceleration and deceleration; the most likely focal point will be the steering wheel.
Humming and Growling
Like many components, the CV axle and joints need lubrication to run smoothly in the constant heat generated by an automobile. If that lubrication begins to dissipate--most likely through leaks in the axle boots--this can cause damage to gears and wheel bearings. When this happens, the vehicle will produce a humming and growling noise as speed increases and lubrication decreases.
In addition to humming, a defective CV axle can develop any number of clicks, pops and clunks as the damage to the axle joints worsens. If a clunking noise is heard while speeding up or slowing down, it can mean damage to the inner and outer CV joints. Continuous knocking, while driving at low speeds, may also be due to joint damage. Clicking or popping sounds may be indicative of a bad outer joint. If any of these noises occur, the vehicle should be taken to a repair shop for further investigation.
- Photo Credit essieux dÃ©sossÃ©s et entreposÃ©s. image by yann&bernard Anceze from Fotolia.com steering wheel and dash of british sports car image by Bo Widerberg from Fotolia.com
CV Axle Bearing Symptoms
The CV (constant velocity) axle is similar to a driveshaft's U-Joint, in that it uses a flexible joint to allow power transfer...
CV Joint Problems
A car's constant velocity (CV) joints normally do their job of keeping the wheels rolling smoothly and securely for more than 100,000...
What Is a CV Axle?
Constant velocity (CV) axles and joints help to provide the forward momentum for movement and turning of a vehicle. CV joints and...
About Bad Axle Bearings
Axle bearings allow car wheel axles to spin. This then allows the car to move supported by the wheel system. When bearings...
Which CV Joint Is Clicking if Turning Left?
The CV joint is responsible for transferring the power of the engine to the wheel. The CV joint is made up of...
How to Locate Wheel Bearing Noise
Wheel bearings are some of the most important and least regarded parts of your vehicle's drivetrain. When they start to malfunction, wheel...
How to Troubleshoot a Front Axle Transmission
The front axle transmission has the responsibility of transferring the engine's power through a system of gears to the front drive wheels....
How to Diagnose a Rear Axle Problem
The rear axle transfers turning power from the transmission to the rear wheels to move your vehicle. Over time, wear or damage...
What Could Happen if You Drive a Car With a Bad CV Joint?
Constant velocity joint failure generally starts out as a set of fairly predictable symptoms, but will always end in a very predictable...
Symptoms of a Broken Shaft Axle
There are several different signs that might pop up to indicate you've bent or broken an axle shaft. A slight wobbling in...
Signs of a Bad CV Joint
Constant-velocity joints allow front wheel drive systems to perform efficiently and smoothly by transferring power through a variable angle, without increasing friction...
Signs of a Bad Rear Differential
The rear differential is an integral part of your vehicle that transmits torque and rotation through shafts running the length of the...