A fingerprint reader is a security device available for Windows and Macintosh computer systems that allows users to access the computer without entering a password or completing another security screening. The device contains a control program that registers the user's fingerprint, as well as any other fingerprints from individuals authorized to use the computer. Fingerprint readers can develop problems, including not recognizing the fingerprint, taking an unusually long time to log into the computer system or presenting errors indicating a problem with the fingerprint or the device.
Cleaning the Fingerprint Reader
Video of the Day
Step 1
Cut a one-inch piece of cellophane tape from a tape dispenser.
Video of the Day
Step 2
Place the sticky side of the tape onto the fingerprint reader's window. Press the tape onto the window, then quickly remove it.
Step 3
Swipe your finger across the reader's window from top to bottom to access the computer. If the reader doesn't recognize the fingerprint or a "can't read" error occurs, proceed to the next step.
Step 4
Apply 1 tbsp. of a mild ammonia-based glass cleaner to a soft cloth or towel. Wipe the fingerprint reader's window gently with the cloth or towel. Use a clean area of the towel or cloth and wipe the reader again.
Step 5
Swipe your finger across the reader again to access the computer. If the reader doesn't recognize your fingerprint or slowly starts processing the fingerprint and then presents a "can't read" error, proceed to "Restarting the Fingerprint Reader."
Restarting the Fingerprint Reader
Step 1
Turn off the computer and unplug the fingerprint reader from the computer's USB port, if the reader is independent of the computer's case, keyboard or mouse. If the reader is part of the computer's keyboard or mouse, unplug the keyboard or mouse.
Step 2
Turn on the computer and reconnect the fingerprint reader, keyboard or mouse as the computer is starting up. Do not connect the fingerprint reader to a USB hub--these devices may not work properly with the reader. Plug the fingerprint reader directly into a USB port.
Step 3
Rub your thumb and one of your fingers together to saturate your finger with oil or moisture. Swipe your finger across the reader from top to bottom to access the computer. Be careful to not move your finger from side-to-side as you swipe it on the reader; this will lead to the reader not recognizing your fingerprint. If the reader doesn't recognize your fingerprint, proceed to the "Re-Registering the Fingerprint Reader" section.
Re-Registering the Fingerprint Reader
Step 1
Click "Start," "All Programs," the fingerprint reader's brand name, then "Fingerprint Enrollment Wizard," "Fingerprint Setup Wizard" or a similarly worded application in Windows. For a Mac, click the Mac's hard drive icon, "Applications," the fingerprint reader's brand name, then "Fingerprint Enrollment Wizard," "Fingerprint Setup Wizard" or a similarly worded application.
Step 2
Insert a finger into the reader when prompted to re-register your print. You can use a different finger than the one previously used to register the fingerprint reader. Follow the on-screen prompts to complete the wizard application. Click "Finish" when complete.
Step 3
Restart the computer. Rub your thumb and one of your fingers to moisten it, then swipe the finger you registered across the reader from top to bottom to access the computer.
- Microsoft Support: The Fingerprint Reader Does Not Register Fingerprints
- Microsoft Support: When You Put Your Finger On The Receiver Of The Fingerprint Reader To Unlock The Computer, The Computer Is Not Unlocked, And You Are Not Logged Onto The Computer
- Microsoft Support: You Cannot Log On To a Computer By Using The Fingerprint Reader
- Microsoft Support: You Cannot Log On To Your Computer By Using The Fingerprint Reader - 885193
- Microsoft Support: How To Clean And Maintain Your Microsoft Fingerprint Reader Device
- HP: Using the Digital Persona Fingerprint Reader
- Microsoft: Microsoft Windows Update