There are three types of bicycle valve stems in use: Schrader, Presta and Woods/Dunlop. The Woods or Dunlop valve stem style is much more rare than the other two. Any wheel rim that fits a Schrader valve can also fit a Woods or Presta valve. A wheel rim designed for Presta valves must be drilled out to fit Schrader or Woods valves. In addition, some pumps inflate only either Schrader or Presta and Woods/Dunlop valves, though many accommodate all types.
You will see Presta valves on most road bike tubes, including tubular or “tubeless” tires. Presta valves are long and skinny, with a nut on top that protects the depressible valve pin from moving and leaking air. A ring-shaped nut screws onto the body of the Presta valve and holds it firmly in place against the rim for easy inflating. Presta valves do not need to be capped, though they do come with a cap meant only to protect the inner tube from the sharp edges of the valve when the tube is rolled up.
Schrader valves, seen on mountain bikes, kids’ bikes and all types of casual riding bikes, are the same valve type you will see on automobile tires. The valve body is shorter than that of a Presta, and the depressible pin sits inside the valve stem rather than on top of it. The valve also contains a spring-loaded core that prevents air leakage when the pin is not pressed. Schrader valves should be covered with the cap that accompanies each inner tube to protect the inside of the valve from dirt, debris and water.
Woods or Dunlop valves have characteristics of both Schrader and Presta valves. Though the base of the valve is similar in width to a Schrader valve, the top part is similar in width to a Presta valve. A ring screws onto the valve body to hold it against the rim, just like a Presta valve. Unlike the Presta valve ring, however, the Woods or Dunlop valve ring forms an airtight seal between the valve and the tube. The valve ring must be airtight because the valve itself isn’t; it is replaceable and you can move it from a worn-out tube to a new tube.
- Photo Credit tyre valve image by TA Craft Photography from Fotolia.com
Types of Tire Valve Stems
A tire valve stem is a simple device that allows air to enter a tire from a pump, and the stem then...
The Purpose of Air Valve Stem Caps
A valve cap is the plastic cap that screws over a valve; usually, valve caps are used on a car or bicycle...
How to Inflate a Bicycle Tire With a Presta Valve
The Presta valve is commonly used on high-pressure road and racing bicycle tires, although it can be found on mountain machines, as...
Bicycle Tire Valve Types
Bicycle tire valves allow riders to inflate their tires with air. According to bicycle expert Sheldon Brown, the three types of bicycle...