What Tools Do I Need for a Scaffold Job?


Scaffolding is erected as a work platform in areas too high to reach from conventional methods such as a step ladder. The scaffold has four basic parts: the planks, cross-bars, frame and connecting pins. To assemble scaffolding, the individual needs some general tools. Most scaffolding accidents happen because the scaffold was incorrectly assembled, according to the Occupational Health and Safety Administration.


  • Assembling a scaffold requires the base unit to be placed on a solid foundation and level. To accomplish the this, the scaffold worker needs a good level that will check the assembled pieces to ensure they are horizontally straight and plumb. A good three-foot level will accomplish this task, but a smaller bob level may be the best choice, as it can be easily carried in a work pouch.

Claw Hammer

  • Even though the scaffolding is put together with pins and clamps, it is a good idea to have a claw hammer available. The claw hammer is used to drive the pins into place or to help remove the pins when a worker disassembles the scaffold. Claw hammers come in different lengths and weights, but a scaffold worker should have a heavy-duty commercial hammer.

Tape Measure

  • A tape measure will be needed to measure the height the scaffold needs to be and to assist the scaffold worker square up the frames. If a scaffold worker has to make his own planks, the tape measure is needed to measure the size of plank required. A worker will also need to measure the distance the scaffold is from the building to make sure the assembly is not tilting as it goes up.

Socket Set

  • A good socket set is required to assemble scaffolding. The cross-braces are attached to the main-frame with pins or clamps. These pins and clamps have nuts and bolts that need to be tightened or loosened when the scaffold is disassembled. Get a socket set that has both standard and metric sockets, as not all scaffolding accessories come with standard nuts and bolts, especially if the scaffold was built outside the United States.

Safety Harness and Lanyard

  • The higher the scaffold goes, the more important a good safety harness and lanyard becomes. A harness comes in many waist and full-body sizes, while the conventional size of a lanyard is three feet. The harness and lanyard are attached to a safety rope and protect the scaffold worker from falling to the ground in case the scaffold crumbles or falls over.

Related Searches


  • Photo Credit man on scaffolds 4172 image by jazzid from Fotolia.com
Promoted By Zergnet



You May Also Like

  • Scaffold Builder Job Description

    A scaffold builder is a construction worker who puts up and takes down scaffolding at construction sites.

  • How to Make a Step Ladder Scaffold

    Are you working on a home project that requires a ladder, just to find that moving the ladder over and over and...

  • How to Rent Scaffolding

    How to Rent Scaffolding. Whether you have been contracted to work on a 12-story office building, or just need roof repair on...

  • How to Become a Certified Scaffolding Builder

    Scaffolding allows a large numbers of builders to work on a multiple-storied structure's facade simultaneously. Quick to assemble, scaffolding's reuseable parts help...

  • How to Build Wood Scaffolds

    Scaffolding is a supporting construction made from wood or metal, mostly steel. It is basically an elevated multi- or single-level working platform...

  • How to Calculate Scaffolding

    Housing and other construction projects often require equipment for reaching the upper portions of a building. Scaffolding provides a safe method for...

  • Types of Claw Hammers

    Claw hammers not only let you remove nails from wood, vinyl and other materials, but also remove fasteners and other hardware that...

  • Parts of a Shrub

    A shrub is a woody perennial plant that can be considered a short version of a tree. The plant's three main components...

Related Searches

Check It Out

3 Day-to-Night Outfits for the Work Week

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!