Types of Seawall Construction


Beach and lake shore erosion is a serious problem. Sea walls of various types can prevent the damage done by seasonal variations in water level, flooding and tidal erosion. Shore conditions help determine the type of seawall construction and materials used. Mortared stone, stone block and steel-reinforced concrete are all used in constructing seawalls. These materials work well to reduce erosion but allow water, from flooding or high tides, to build up behind the wall. For inland applications rock riprap, combined with shore plants, is the preferred method of erosion abatement.


  • Riprap is stone of various types that is used to protect, or armor, a shoreline or river bank. Riprap is often a mixture of granite, limestone and concrete rubble in chunks spread along the shore. This form of revetment is often used because it allows plant life to grow in the surrounding soil and in the crevices between the stones. Riprap seawalls are effective because they dissipate the force of waves before it can reach the soil and sand behind the rocks. Riprap is also used to reinforce old seawalls by placing it at the bottom of the walls.

Cobble Boulder

  • Cobble boulder seawalls are a familiar sight along lake shore beaches and river banks. Large, round cobbles held together with mortar angle down towards the water. Cobble boulder seawalls are usually placed in less demanding areas where wave action is not extreme. This type of revetment is composed of large rocks stacked over a mound of rubble, small stones and dirt. The stones can be piled in place with open spaces to allow water to flow through or joined with mortar.

Concrete Seawalls

  • Concrete seawalls reinforced with steel are large structures designed to protect coastal areas from heavy wave action. Coastal cities invest large sums of capital into seawall building and maintenance. This type of concrete erosion barrier is often built using large concrete sections which are lowered into place with a crane. Concrete seawalls are made with different face shapes and are held in place with heavy pilings. Curved seawall faces break up the wave energy and direct it back outwards while straight-faced seawalls absorb the impact.

Related Searches


Promoted By Zergnet



You May Also Like

  • About Seawalls

    Seawalls are a type of coastal defense built on the shoreline to reduce the damage from waves and storms. They are also...

  • About Concrete Block Walls

    Concrete block walls are everywhere, and they are used for everything from building homes and buildings to surrounding or marking off landscaping....

  • Types of Piles

    Piles are an important part of construction. There are different kinds of piles that are designed to carry the weight of the...

  • Types of Construction Vehicles

    To prepare land and build a structure at a construction site, companies use a variety of vehicles. Each vehicle has its own...

  • How to Install a Steel Sea Wall

    You cannot install a steel sea wall by yourself. It requires at least a three-member team, and one of you must have...

  • How to Build a Seawall

    A seawall can prevent loss of your waterfront property to erosion. Building a seawall takes a lot of physical labor, but it's...

  • How to Build Concrete Sack Walls

    When it comes to general landscaping, retaining walls are invaluable in giving your yard a professional look, while allowing you to add...

  • How to Repair a Concrete Seawall

    A seawall is an invaluable structure for those homeowners who live close to the ocean and rely on the concrete wall to...

  • How to Build a Wood Seawall

    A seawall is a barrier that is constructed to prevent water from eroding the front of property that sits on a body...

  • How to Repair a Wooden Seawall

    A seawall is a barrier that prevents beach erosion by acting as a line of defense by holding back water. Because it...

  • How to Convert Cubic Yards to Tons of Rip Rap

    People who live near the sea fortify shorelines with riprap, a collection of rock or rubble. This stone barrier absorbs the waves'...

  • Types of Bulkheads & Seawalls

    Bulkheads and seawalls are man-made structures designed to protect bluffs and land banks by separating water and land. Bulkheads serve as retaining...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!