Cooktop Power Requirements

Save

Cooktop power and amperage requirements depend largely on whether you intend to use a gas or electric cooktop and the age of your home. If the house is less than 15 years old, all power wiring requirements are likely met. If the home is older than 15 years, some electrical power line upgrades might need to be addressed.

New Home Power Requirements

  • Check your current electric or gas range wall outlet. Likely the wiring is already 120/240 volts. If your current electric range is 120 volts, it will be plugged into or hardwired to a separate 120-volt outlet fed from a dedicated 120V circuit breaker. An additional 3-prong receptacle will be on the wall. You will need only to purchase a new power cord for the electric cooktop, usually a requirement no matter what your current wiring set up. A gas cooktop should work well with the current set up provided you have gas utility service coming into the home.

Older Home Requirements

  • Check the electrical outlet. Is the current electric range hardwired to the power supply? Hard wiring is two or more actual wires leading from the wall power source to the stove wiring. If it's hardwired, the voltage is most likely 120. You will need an electrician to install a new dedicated 240-volt circuit breaker in the breaker box then run a 240V line from the circuit breaker to the wall behind the stove where the 120 voltage is now located. To make the proper voltage adjustments, a new wall outlet will be installed for the new cooktop. A gas cooktop could require a dedicated 120V circuit breaker and/or a line running from the breaker box to an outlet installed behind the stove to power the ignitor.

Power Source Location

  • The distance from the power source will largely dictate the amount of time it takes to complete the conversion and the cost to do it. In homes where the kitchens are located in the front of the house and the breaker boxes are located in the rear, the 240 volt line must travel from the back to the front. The electrician will drill into an outside wood or brick wall located nearest the cooktop area to pull the line inside. He will then install an inside wall receptacle to plug in a new power cord leading from there to the stove.

Related Searches

References

  • Photo Credit electric mainhole image by Adkok from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Install a Jenn-Air Cooktop

    Kitchen islands are popular features in modern kitchens. These allow cooks more room in the kitchen for appliances and countertop space. Jenn-Air...

  • Do Island Electric Cooktops Need a Vent?

    Ventilation is the process of exchanging fresh air from the outside with indoor air. Exhaust is the process of expelling indoor air...

  • Cooktop Ventilation Requirements

    Meeting cooktop ventilation requirements ensures the safe discharge of by-products--such as heat, grease and odors--from the kitchen. Properly ventilating the appliance includes...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!