Auto Repair

The Mitsubishi Eclipse has been around since 1990. The vehicle features front disc brakes and may feature either rear disc brakes or rear drum brakes, depending on the series of the model. After...

The braking system is one of the most important parts of an automobile. Brakes are integral to vehicle safety as well as performance. Like most vehicle systems, brakes also require occasional...

The brakes are one of the most important systems of a car, both in terms of performance and safety. As they wear down over time, brakes require occasional service, and new brake pads must be...

The exact type of rear brakes can vary on cars. Some cars have brake calipers and pads like the front wheels, most use brake drums and shoes that work with the parking brake, and others use both....

Do you have a KIA Sedona that needs new brake pads? If you said yes then please be aware that the brake shops will charge you around 149 dollars and the dealerships will charge you around 195...

The disc brake pads on a Mitsubishi Eclipse apply friction to the brake rotor in order to slow the vehicle. The two-door coupe Eclipse has been in production since 1990 and has also been sold as...

Car repairs are extremely expensive with many shops charging labor rates of one hundred dollars per hour so the opportunity exists for you to save a bundle by doing your own car repairs. Brake...

The Ford Crown Victoria is one of the longest-tenured vehicles in the history of Ford Motor Co. It has featured rear disc brakes since the early 1980s, though the car also has been available with...

The Chevrolet Suburban was manufactured with a front disc braking system; this system uses hydraulically actuated calipers to apply friction pads against a rotor, which stops the truck. When these...

I was looking for instruction on how to change the front brake pads and the rotors on my 12 year old 97 Nissan Sentra GXE. I found some generic instructions and videos. Some of them were not very...

Brake shoes play an important role in the brake system of a vehicle. The brake shoes are necessary to manipulate the brake and cause a vehicle to gradually slow down or stop abruptly for an...

The Ducati line of motorcycles are essentially racing motorcycles. These sport bikes are made by Ducati Motor Holding S.p.A., an Italian motorcycle manufacturer. The brakes on the Ducati bikes are...

Most vehicles manufactured in the late 20th century came with disc-style front braking systems, which include a caliper, rotor and pads. Any of these parts can wear out and require replacement....

At any time the front brake pads on a Chevy Malibu are replaced, the rotors should be machined so that the new pads have a smooth surface to ride on. If the rotor is not turned, the front pads...

When buying brake pads for a Chevrolet Blazer, don't deviate from the original specifications. There are organic, semi-metallic and metallic pads. Each of these pads is designed to work in a...

The Renault Clio 2 is a French automobile. The brake system uses a caliper and piston design for maximum clamping force. Over time, the friction material in the brake linings wears down. This is...

Rear disc brakes are becoming more and more popular on cars and light trucks. They feature rear rotors, calipers and brake pads. Rear disc brakes work better than drum brakes and require no...

The 1994 Ford Taurus comes with front disc brakes and may also come equipped with rear disc or rear drum brakes. Replacing the front brakes in the Taurus is a relatively unchanged process no...

The brake pads on the 2003 Oldsmobile Alero need to be checked every six months for wear. The brake pads contain a friction material that wears away over time. Eventually, the pad material will...

The Buick Regal LS features front disc brakes and may come with rear disc or rear drum brakes. Replacing the front pads is more common on the Regal since it provides 80 percent braking power for...

The Chevrolet Trailblazer was introduced in 2002, replacing the Blazer. The brake configuration was the same as the Blazer; and like the later model Blazers, the Trailblazer featured either rear...

The Chrysler Sebring was manufactured with a hydraulic braking system that uses a caliper/pad and drum/shoe setup to stop the vehicle. Later or upgraded models can have four wheel disc brakes. The...

You no doubt have heard the advice that it is wise to take care of a small problem with your vehicle before it becomes a larger one. This is especially true of the brakes on your car. The brake...

Honda automobiles are manufactured with rear disc brakes on some models. This hydraulic caliper, rotor and pad system can wear out and require the replacement of some parts to function correctly....

The brake pads on a Toyota 4Runner need to be changed every year. Usually, this is because the pad material grinds down to about 1/8 inch thick. At this thickness, the pads will have a hard time...

Change the brakes on your Saturn vehicle about every 60,000 miles. The Saturn L200 uses brake calipers on all wheels, but only the front brakes use standard brake pads. Still, there are a few...

The Hyundai Accent is manufactured with a hydraulic braking system that uses calipers, rotors and pads to provide most of the car's stopping power. The pads can wear out, and when that happens,...

The Ford Mondeo uses a hydraulic caliper braking system that must be maintained to operate properly. The brake pads are a routine maintenance item and are designed to wear out of material and...

The 1984 Chevrolet Camaro was manufactured with a hydraulic braking system that employs front disc brakes. The brake pads are pressed against the rotor with caliper pistons, and they can wear out...

The Mitsubishi Lancer is manufactured with a hydraulically operated caliper braking system that requires routine pad maintenance. Replacing worn or damaged pads ensures safe braking and can...

The Land Rover Freelander is manufactured with a hydraulic disk braking system that requires routine maintenance to function correctly. The twin braking pads on each caliper will wear down their...

Brakes are an essential component of a vehicles driving system, and would be rendered useless without the addition of brake pads. Brake pads do the same job on a disc brake setup that brake shoes...

The Mazda Multi-Purpose Vehicle, or MPV, was a minivan manufactured with a hydraulic caliper and pad front brake design, which occasionally requires maintenance. The twin pads on either side will...

The brake pads on your Honda Civic should be changed every 60,000 miles, though they may need changing sooner depending on how hard you regularly use the brakes. The brake assemblies are one of...

The Dodge Dakota pickup truck is designed with a hydraulic master cylinder braking system, which uses front disc and rear drum components that can wear out and fail. Troubleshooting a Dakota brake...

The brake pads on an Oldsmobile Alero are of the caliper and rotor design. The caliper design allows for maximum clamping force on the rotor. However, it also works to wear down the brake pads...

Installing the brake pads on a 1997 Honda Accord is a relatively straightforward process. However, before you can install the pads, you need to force the caliper piston back into the caliper. This...

The brake pads in a Ford Ranger help to stop the vehicle by creating friction against the brake rotor. As brake fluid is forced through steel piping (brake line), a brake caliper piston pushes...

The Chevrolet Silverado is manufactured with a hydraulic braking system that uses a combination of rotors and disks and drums and shoes to stop or slow the truck. This system has had a high number...

The brake pads on your vehicle typically wear out over time, requiring that they be replaced routinely. Driving on worn or defective brakes can create a dangerous situation. When you start to feel...

The Saturn line of automobiles is manufactured with rear disk brakes which contain routine maintenance parts that must be replaced at regular intervals. The rear disk brake pads have a friction...

Installing front disc brakes on a Ford F-150 pickup is a straightforward process and requires basic tools. It is possible to just replace brake pads, though the correct way is to have the rotors...

The brake pads on a Honda CR-V need to be replaced when the pad material is 1/8-inch thick. Although pad replacement is mandatory at this pad thickness, you should replace the brake pads on the...

The brake pads on a Ford Windstar use a brake caliper and rotor design. Over time, the brake pads wear down due to the friction generated by the intense clamping forces of the brake caliper. When...

As automotive brake systems have evolved, the need for improvements in brake-pad efficiency has been addressed by auto manufacturers. The organic pad compounds of the 1970s didn't provide the...

The quick and easy answer to the question is "no." However, this answer is relative to the reason why the pads are being replaced. If the disc brake system has been functioning properly and the...

The most common problem with Chevy brake systems is worn brake shoes and pads. The brake pads are designed to be wearable parts which must be replaced periodically to ensure proper brake function....

The Chevy Suburban is the longest living model to exist in the General Motors family to date. The station wagon shaped SUV began production in 1935 and is still produced at this time. The vehicle...

Depending on the year and manufacturing plant of your VW Passat, there could be a few different front braking systems in place that will vary slightly in procedure. Inspecting the brake system and...

Metallic, or carbon metallic brake pads as they are commonly referred to, have some advantages over ceramic pads, but those advantages may not be outweighed by the disadvantages. The disadvantages...