Transformers change the voltage of a power supply to meet the needs of individual consumers, specific appliances or subsystems within an appliance. As the names imply, a step-up transformer converts power to a higher voltage and a step-down transformer reduces voltage. A community power grid includes a series of transformers for regulating voltages. Consumer electronics and appliances also use transformers to distribute differing voltages.
Step-Up and Step-Down Design
Two wires carrying voltage from a power source wind around an iron core in a primary coil. An additional wire winds around another part of the iron core in a secondary coil to create a transformer. A step-up transformer has more wraps around the secondary coil, and a step-down transformer winds the primary coil more. The voltage changes based on the difference between the number of winds on the two coils.
It is possible to use the same iron core to transform the voltage to both higher and lower values. Multiple transformers use additional secondary coils. One secondary coil has fewer wraps than the primary coil, which generates lower voltage. Another secondary coil has more wraps than the primary coil and works to increase voltage to supply greater power to another component or circuit. The component works as both a step-down and step-up transformer.
Doorbells illustrate a common voltage step-down application. Typical doorbells use 16 volts, but household power circuits carry 120 volts. A step-down transformer receives the 120-volt power wires and reduces the current to a lower voltage before delivering the power to the doorbell. Utility companies use step-down transformers to lower power line voltage going to individual buildings. Step-down applications also send power to low-voltage indicator lights in 240-volt appliances.
A common step-up application is the starter for an electric motor. It takes a lot of voltage to initially start a motor turning. Step-up transformers provide that extra power even though the appliance uses standard 120- or 240-volt power. Power companies transmit power across long distances using large-scale step-up applications. Transformers make power distribution possible for metropolitan electric grids. These transformers elevate voltage and push current in large and small circuits.
- Photo Credit Hemera Technologies/AbleStock.com/Getty Images
Types of Electrical Transformers
Transformers are used to change the voltage of an alternating circuit. They do this by connecting two circuits at a magnetic core...
What Is a Step Up Transformer?
Transformers are a pair of coils or solenoids that are usually wrapped around an iron core. Step-up transformers are created specifically to...
How to Check a Step Down Transformer
Step down transformers are used to take a high voltage and transform it to a lower workable power. Typically, step down transformers...
How to Calculate Electrical Transformer Output
A transformer is essentially a pair of coils wrapped around iron cores, which are called primary windings and secondary windings for input...
Difference Between Counter Flashing & Step Flashing
Flashing is a thin, flat metal sheet made of aluminum, copper or galvanized steel used to create a water barrier when differing...