What Is Self-Etching Primer?


Anyone who has had to paint metal knows that the first step is to strip off the old paint, or at least cover it with primer so that the new coat will adhere properly. For parts that need to be stripped down to the metal surface, etching helps new paint stay on instead of peel off when dried. Self-etching primer combines the two-step process of etching and primer into one chemical.

How it Works

  • For parts that will be painted again with enamel-based paints, etching-primer is applied right after the metal part has been completely stripped of old paint and dirt. This not only protects the metal from flash rust due to oxidation, but also prepares the surface for the final paint coat. The primer itself includes acid and zinc as the operative elements. The acid burns into the metal chemically and the zinc applies a seal. For the etching process to work correctly, the metal must be completely bare so that all oil residue and previous paint can be removed.


  • Any rust on metal parts must be removed first either by sanding, media blasting or brushing off with metal brushes. Self-etching primer will not get rid of the rust; it will only paint over it. This will stop corrosion expansion until the area once again gets exposed to moisture and air.

Buying the Primer

  • Self-etching primer frequently comes in a gray color, similar to other primer paint. The tell-tale feature will be on the description of the paint container, specifically identifying the self-etching feature included in the paint. The most common paint type comes in a spray can version, which is the easiest to apply.


  • The application does not require multiple coats. One coat is enough since the secondary and final coats of paint will provide the actual outer surface. For metal parts with nicks, dents, and scratches, Bondo or similar filler needs to be applied and sanded down first to provide a smoother surface for the primer application. The self-etching chemicals will not affect the Bondo filler once it is dried onto the metal.

Related Searches


  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet


You May Also Like

  • What Is Etching?

    Etching has been around for nearly 500 years. It is a type of engraving, where ink is forced through tiny lines and...

  • How to Use a PPG DZ3 Primer

    PPG Kondar DZ3 light gray acrylic primer surfacer acts as a second coat between the primer and the final finish on metal...

  • How to Paint Brass Hardware

    Painting your hardware and fixtures can add a dramatic new look to your home for a minimum investment in materials. Some fixtures...

  • How to Paint Bare Aluminum

    Bare aluminum is similar to vinyl, fiberglass and plastic in that it requires abrasion before any paint will adhere to it. Unlike...

  • What Is Etching Primer Used For?

    Etching primer has many different uses in a variety of industries, such as automotive, construction and medical. Etching primer is made with...

  • What Kind of Primer for Rusty Metal?

    Unless it is galvanized, bare metal will rust if it's exposed to moisture and oxygen. Once rust sets in, it will ultimately...

  • What Primer Do You Use for Cast Iron?

    Bare cast iron is nonporous and too slick to support long-lasting painted finishes. If you try to paint directly over the top...

  • Uses for Auto Primers & Sealers

    Primers and sealers figure prominently in the auto body repair and detailing industry. Different types of primers are available to meet specific...

  • Can You Put Self-Etching Primer Over Clear Coat & Paint?

    Do it yourself painting can be a rewarding experience that can save you money in the long run, as long as you're...

  • Can You Paint Galvanized Metal?

    Galvanized metal is metal that has been coated with zinc. This coating protects metal from the damaging effects of weather and rust....

Related Searches

Check It Out

How To Travel For Free With Reward Points

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!