Orbit Sprinkler Head Won't Rotate

Save

Rotating sprinkler heads are good for watering lawns with large areas or gardens that require routine drenching. But rotating sprinkler heads are more prone to problems given that they contain the most moving parts of any sprinkler type. Rotating sprinklers use water pressure to move a series of tiny gears inside the sprinkler body. When the sprinkler becomes clogged or damaged, it may stop working properly. Understanding the causes of these problems will help you diagnose and repair your sprinklers.

Clogged Filters

  • Almost all sprinklers contain a small plastic filter. This filter is accessible by twisting the nozzle off. The plastic screen filters dirt and other debris that could clog your sprinkler nozzle. When the filter becomes caked with dirt, it slows the flow of water considerably as well as the rotation of the head. Scrubbing the filter with a nylon brush will remove the dirt and clear up performance.

Damaged Heads

  • Sprinkler heads are usually made out of plastic or a combination of brass and plastic. These materials can buckle, bend and break when run over by a lawnmower or car. When a sprinkler is run over, it can compress the spring inside, which can stop the rotation of the head. Smashed sprinklers also won't pop up correctly, leading to problems with even water coverage. A damaged sprinkler head will need to be replaced with a new unit.

Damaged Supply Tubes

  • Pop-up sprinklers, including rotating heads, use water pressure to lift the nozzle out of the ground. Small bits of sand or gravel can become lodged between the inner supply tube and the outside of the sprinkler body. When this happens, friction can build up over time and scar the outside of the supply tube. Eventually, the head will stop rotating as the friction stops the tubes from moving freely. When this happens, the entire sprinkler must be replaced.

Damaged Internal Components

  • Rotating sprinkler heads contain a number of small gears. These gears must be lubricated to move freely. In most cases, water is the lubricant. But some sprinkler heads contain a small amount of oil inside that lubricates the gears. If the oil dries out or leaks, it can cause damage to the internal gears, and the rotating motion will stop working. Since these types of sprinklers have sealed housings, you will have to replace the entire sprinkler if faulty lubrication is to blame.

References

  • Photo Credit Photos.com/Photos.com/Getty Images
Promoted By Zergnet

Comments

Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!