The Difference Between Single Phase & Three Phase Electrical Wiring

Oil wells can use single-phase or three-phase wiring to power the pumps.
••• Photos.com/Photos.com/Getty Images

The difference between three phase and single phase is primarily in the voltage that is received through each type of wire. There is no such thing as two-phase power, which is a surprise to some people. Single-phase power is commonly called "split-phase." You have some ways to determine whether you have three-phase wire or single-phase wire.

Single Phase

Single-phase wire has three wires located within the insulation. Two hot wires and one neutral wire provide the power. Each hot wire provides 120 volts of electricity. The neutral is tapped off from the transformer. A two-phase circuit probably exists because most water heaters, stoves and clothes dryers require 240 volts to operate. These circuits are fed by both hot wires, but this is just a full phase circuit from a single-phase wire. Every other appliance is operated off of 120 volts of electricity, which is only using one hot wire and the neutral. The type of circuit using hot and neutral wires is why it is commonly called a split-phase circuit. The single-phase wire has the two hot wires surrounded by black and red insulation, the neutral is always white and there is a green grounding wire.

Three Phase

Three-phase power is supplied by four wires. Three hot wires carrying 120 volts of electricity and one neutral. Two hot wires and the neutral run to a piece of machinery requiring 240 volts of power. Three-phase power is more efficient than single-phase power. Imagine one man pushing a car up a hill; this is an example of single-phase power. Three-phase power is like having three men of equal strength pushing that same car up the same hill. The three hot wires in a three-phase circuit are colored black, blue and red; a white wire is the neutral and a green wire is used for the ground.

Uses

Another difference between three-phase wire and single-phase wire concerns where each type of wire is used. Most, if not all, residential homes have single-phase wire installed. All commercial buildings have three-phase wire installed from the power company. Three-phase motors provide more power than a single-phase motor can provide. Since most commercial properties use machinery and equipment that runs off three-phase motors, three-phase wire must be used to operate the systems. Everything in a residential home only operates off of single-phase power such as outlets, light, refrigerator and even the appliances using 240 volts of electricity.

Determining Which Type

Discovering which type of wire is being used is easily done. First look at the wires and see how the number of wires inside the outer insulation. You can also check the voltage. A three-phase wire generally reads 120 volts between a hot and the ground as well as 206 volts between two hots. A single-phase wire generally reads 120 volts between a hot and ground, but 240 volts between the two hot wires.

Related Articles

How to Tell the Negative on an Electrical Appliance...
How Does a 3-Pin Plug Work?
How to Wire a Stepper Motor
How a Three-Phase Motor Works
How to Test DC Motors
Fifth Grade Science Fair Projects on Circuits
What Is the Grey Electrical Wire?
How to Connect Step-Up 3-Phase Transformers
What Is a Ferrite Clamp?
How to Install a Shunt-Trip Circuit Breaker
How to Make a Simple Circuit for Kids Using a Battery...
How to Convert Mechanical Energy Into Electric Energy
How Does a DC Power Supply Work?
How to Check Three-Phase Voltage
How to Wire a High & Low Voltage Three-Phase Motor
How to Wire Two 12 Volt Batteries to Make 24 Volts
How to Test for an Open Circuit in a Home
Circuit Breakers That Are Compatible With ITE

Dont Go!

We Have More Great Sciencing Articles!