Road Rules for the Height of Tractor Trailers
Over the road commercial trucks deliver products to and from manufacturers, warehouses and retailers across the country's extensive highway system. These commercial vehicles are regulated by federal, state and local agencies. Commercial over the road (OTR) truck drivers must be aware of different regulations, as well as the size of their rig and any limiting factors, such as low bridges, that they may encounter along their route.
Other People Are Reading
-
Clearly Marked Height
-
Most tractor-trailer rigs have the trailer's height clearly marked on the leading edge of the trailer. The markings are painted in reverse so that when the OTR driver looks in his rear view mirror, the label is viewed in the proper orientation. As the commercial driver travels down the highway, every overhead bridge has a roadside sign that clearly announces the bridge height. Drivers must be aware of their truck's height, and the height of oncoming bridges at all times.
Federal Height Regulations
-
While the federal government regulates most aspects of commercial semi-truck drivers and their equipment, it has not imposed a federal vehicle height limit. Since the bridges were built within a set height range, these bridges serve to limit the truck's sizes. A semi rig and its trailer must be a lower height than the measured bridge clearance.
-
State Height Regulations
-
Local and state transportation agencies impose height limitations for commercial semi-tractor trailer trucks. Most states have limited commercial semi rigs to a height of 13 feet, 6 inches. Some states allow a vehicle's height to reach 14 feet, such as Florida's regulation for car carrying vehicles. States issue local regulations as a way of protecting the commercial OTR driver. Because states track the height of the bridges in their jurisdiction, their guidelines let the truck drivers know the maximum size trailers that can travel through their states.
Low Clearance Bridges
-
In some cases, the geographic formations in or around a highway's construction path limited a bridge height. In this case, state highway's are clearly marked with a "Low Bridge" clearance sign, so unsuspecting drivers can exit the highway before encountering a low bridge. Serious injury to the truck driver, cargo and the highway bridge can occur if an OTR semi driver fails to identify a low bridge hazard.
-
References
Resources
- Photo Credit Jupiterimages/Comstock/Getty Images
