Easy-to-Install Push-in Ground Fencing

Save

Push-in fence posts are often referred to as step-in posts. This is because the act of pushing them into the ground is accomplished by placing a foot on the brace at the base near the base of the post. The posts are commonly used for temporary fencing within a pasture that has a sturdier perimeter fence. The posts are always used with electric fence systems. The push-in fencing is easy to install, requiring few tools.

Using Push-in Posts

  • Landowners use push-in posts in situations where no animal will be leaning on or stressing the fence wires. This is accomplished by using an electrically charged wire on the fence that trains the animals to refrain from touching the fence. Using smooth wire or electric fencing tape with the posts along with a charger completes the package.

Push-in Post Advantages

  • Made of plastic or fiberglass, push-in posts are already electric insulators. This means a separate insulator, necessary for steel or wood posts, is not required. The posts are inexpensive when compared to other fence post types and require no tools for installation. These two factors make them ideal for temporary fence enclosures.

Push-in Post Disadvantages

  • The push-in post is really just a piece of plastic or fiberglass pushed into the ground. If an animal pushes on it, it will break of bend over. This can happen if the electric fence system fails and there is no charge on the wire to discourage the animals.

Installation

  • Push-in fence posts should be placed about every 15 feet in the fence line.Corner posts or posts where strain from the wire may occur should be braced using tent stakes, driving the tent stake into the ground about 4 feet to the outside of the fence. Tightening a wire between the top of the push-in post and the tent stake holds the post steady.

Related Searches

References

Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!