Types of Vapor Barriers

Save
A vapor barrier does not need to be continuous to be effective.
A vapor barrier does not need to be continuous to be effective. (Image: Jupiterimages/Comstock/Getty Images)

Vapor barriers or vapor retarders are defined by their permeance (perm). This is the number of grains of water that can pass through one square meter of material per second. A material is a good vapor barrier if its perm rating is less than 1.0. There is a variety of products that have been used as vapor barriers over the years.

Polyethylene Film

This is the most common type of vapor barrier used in modern construction because it serves a dual purpose as an air barrier as well. It is commonly sold in 6/1000-inch thickness (six-mil). It is a semi-clear plastic film and is typically installed behind the drywall inside the house. It is also popular because it is inexpensive and easy to install. The drawbacks are that it deteriorates quickly if left exposed to the sun, and it is easily punctured.

Kraft Paper

Fiberglass and mineral wool insulation batts are sold with brown Kraft paper glued to one side. This product can act as a vapor barrier in a limited fashion. It is typically found on older homes.

Aluminum Foil

Aluminum foil was intended as a radiant barrier to reflect heat, but it also acts as a vapor barrier. It is installed on batt insulation in a similar fashion as Kraft paper.

Insulations

Expanded and extruded polystyrene board can act as a vapor barrier if it is thick enough. Foamed-in-place insulation can also prevent moisture penetration.

Vinyl Wallpaper

Vinyl wallpaper makes a surprisingly good vapor barrier. It is not recommended to install this type of wallpaper in hot climates for this reason. Vapor barriers typically are installed on the exterior of the wall system in hot areas.

Related Searches

Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!